417-862-4455
1977-1991 GM Corporate 10 Bolt 4X4 Left Front Inner Axle Shaft Chevy 28 Spline Corporation
$139.00
- SKU: 660276-1
- Brand: Dana/Spicer
- Weight: 26.0
- Shipping: Calculated at checkout
This is a genuine Dana/Spicer left inner axle shaft the fits the corporate 10 bolt 4X4 front end in 1977-1991 GM 1/2 and 3/4 ton trucks, Blazers, and Suburbans. This axle is 28 spline and is 35.46″ from center of u-joint to end of splines. This will not fit Dana 44 front ends which also have a 10 bolt cover. The corporate 10 bolt has a more rounded “egg” shaped cover.
| Weight | 26.0 lbs |
|---|---|
| Dimensions | 36 × 6 × 6 in |
Reviews
There are no reviews yet.
| Make | Model | Year |
|---|---|---|
| GM/Chevy | Blazer | 1977 - 1978 |
| GM/Chevy | Blazer | 1979 - 1980 |
| GM/Chevy | Blazer | 1981 - 1982 |
| GM/Chevy | Blazer | 1983 - 1984 |
| GM/Chevy | Blazer | 1985 - 1986 |
| GM/Chevy | Blazer | 1987 - 1988 |
| GM/Chevy | Blazer | 1989 - 1990 |
| GM/Chevy | Blazer | 1991 |
| GM/Chevy | K10 | 1977 - 1978 |
| GM/Chevy | K10 | 1979 - 1980 |
| GM/Chevy | K10 | 1981 - 1982 |
| GM/Chevy | K10 | 1983 - 1984 |
| GM/Chevy | K10 | 1985 - 1986 |
| GM/Chevy | K10 | 1987 - 1988 |
| GM/Chevy | K10 | 1989 - 1990 |
| GM/Chevy | K10 | 1991 |
| GM/Chevy | K20 | 1977 - 1978 |
| GM/Chevy | K20 | 1979 - 1980 |
| GM/Chevy | K20 | 1981 - 1982 |
| GM/Chevy | K20 | 1983 - 1984 |
| GM/Chevy | K20 | 1985 - 1986 |
| GM/Chevy | K20 | 1987 - 1988 |
| GM/Chevy | K20 | 1989 - 1990 |
| GM/Chevy | K20 | 1991 |
Related products
Axles & Axle Bearings
AAM 9.25 Dodge Ram LH Left Front Inner Axle Shaft 4X4 2003-2009
This is a genuine AAM left hand inner axle shaft for the front of a Dodge Ram 3/4 or 1 ton truck from 2003-2009. This axle is 19 5/8″ long from the center of the u-joint to the tip of the splines. This is set up for the 1485 series u-joint.
View Details
Axles & Axle Bearings
Dana 44 60 Dodge Disconnect Slide Collar Front Differential Axle 4X4
This genuine Dana slide collar fits most Dodge Dana 44 and 60 front disconnect axles up to 1999. 2000+ Dodge Dana 60’s used a lerger splined slide collar which is not available from Dana.
View Details
Axles & Axle Bearings
AAM 1999+ GM 9.5 9 1/2″ 14 Bolt Rear Axle Shaft 2 Wheel Drive 2wd or 4wd 33 Spline 8 Lug Disc Brakes
This is a genuine AAM rear axle shaft that fits some 2 or 4 wheel drive GM 3/4 ton trucks with the 9.5 rear differential 1999-2004 with rear disc brakes. This axle is 33 5/16″ long and 8 lug and 33 splines. Please check length or part number before ordering as there are several divverent [...]
View Details
Axles & Axle Bearings
Ford Dana 50 & 60 Front 4X4 Outer Stub Axle 1998-2004 4X4 F250 F350 Excursion
This genuine Dana outer stub axle fits 1998-2004 Ford 3/4 and 1 ton trucks with either the Dana 50 or Dana 60 straight front axle. These were for the trucks with front hub assemblies rather than spindles with individual hub bearings. This axle is 9.39 long from the center of the u-joint out and 1.31 [...]
View Details
Axles & Axle Bearings
Dodge Dana 60 Front 4X4 Outer Stub Axle 1994 1995 1996 1997 1998 1999
This is a genuine Dana front outer stub axle that fits 3/4 and 1 ton Dodge trucks from 1994-1999. It is 7.05″ long.
View Details
Axles & Axle Bearings
1992-2005 Chevy GMC S10 S15 Axle Bearing & Seal Kit 7.5/7.6 GM7.5 GM7.6
This ia a genuine AAM axle bearing kit for the 7.5 and 7.6 rear axles found in 1992-2005 Chevy S10’s and Blazers also GMC S15’s. This kit includes all parts necessary to replace the axle bearings and seals on both sides. The common part numbers for the bearings is 5707 and the seals are 8660S. [...]
View Details
Axles & Axle Bearings
Chevrolet Astro GMC Safari Van Minivan Rear Axle Bearing Kit 7.5/7.6 1990-2002 AAM
This is a genuine AAM axle bearing kit for the rear of the Chevrolet Astro or GMC Safari minivans with the 7.5 or 7.6 rear differential from 1990-2002. The industry numbers are 513023 (bearings) and 4795V (seals). This kit includes bearings and seals for both sides as well as axle c-clips, and is much cheaper [...]
View Details
Axles & Axle Bearings
AAM Dodge 9.25 Front Outer Stub Axle 2003-2008 C9.25 Ram 2500 3500
This is a genuine AAM outer stub axle for the front of a 3/4 or 1 ton Dodge truck 2003-2008. These are for the 1485 series u-joint.
View Details
Be the first to review “1977-1991 GM Corporate 10 Bolt 4X4 Left Front Inner Axle Shaft Chevy 28 Spline Corporation”
You must be logged in to post a review.