417-862-4455
1984-2006 Jeep Dana 30 4X4 Left Front Axle Shaft Assembly Wrangler Cherokee Comanche
$285.00
- SKU: 75814-1X
- Brand: Dana/Spicer
- Weight: 12.0
- Shipping: Calculated at checkout
1 in stock
This is a genuine Dana/Spicer right front axle shaft that fits various 1984-2006 Jeep Wrangle, Cherokee, and Comanche vehicles. 22.68″ overall length. 27 inner spline and 27 outer spline.
| Weight | 12.0 lbs |
|---|---|
| Dimensions | 25 × 6 × 6 in |
General Inquiries
There are no inquiries yet.
Related products
Axles & Axle Bearings
AAM 1988-1991 GM 8.5 8 1/2″ 10 Bolt Rear Axle Shaft 2 Wheel Drive 5 Lug 2wd 30 Spline
This is a genuine AAM rear axle shaft that fits 2 wheel drive GM 1/2 ton trucks Suburban and Tahoe with the 8.5 rear differential 1988-1991. This axle is 31 3/8″ long and 6 lug and 30 splines. This is actually a GM part number and the last 4 digits are cast on the center [...]
View Details
Axles & Axle Bearings
This genuine Dana front outer stub axle fits Dodge 1/2 ton trucks from 1994-2001 with the Dana 44 front axle. this axle is 6.77 long from the center of the u-joint to the tip of the splines and is 1.41 33 spline. If you are not sure of this part number you can call or [...]
View Details
Axles & Axle Bearings
AAM Dodge 9.25 Right RH Front Axle Assembly 2003-2008 C9.25 Ram 2500 3500
This is a genuine AAM right hand axle assembly for the front of a 3/4 or 1 ton Dodge truck 2003-2008. These are for the 1485 series u-joint. The tag has the Dodge part number 5086666AB for reference.
View Details
Axles & Axle Bearings
AAM Rear Axle Shaft 1988-1991 4X4 4wd GM Chevy Blazer Suburban 8.5 8 1/2 10 Bolt 6 Lug
This is a genuine AAM rear axle shaft that fits GM 4X4 Suburban and Blazer 1988-1991 that still used the straight front axle. This axle is 31 1/2″ long 30 spline and 6 lug. This is actually a GM part number. The last 4 digits are usually cast on the axle flange of the original [...]
View Details
Axles & Axle Bearings
Dodge Dana 60 Disconnect Middle Intermediate Axle 2000, 2001, 2002
This is a genuine Dana intermediate axle for a Dana 60 with a disconnect axle in a Dodge 3/4 or 1 ton truck from 2000-2002. This axle is set up for a larger slide collar than the earlier models. This axle runs from the slide collar out to the u-joint.
View Details
Axles & Axle Bearings
1992-2005 Chevy GMC S10 S15 Axle Bearing & Seal Kit 7.5/7.6 GM7.5 GM7.6
This ia a genuine AAM axle bearing kit for the 7.5 and 7.6 rear axles found in 1992-2005 Chevy S10’s and Blazers also GMC S15’s. This kit includes all parts necessary to replace the axle bearings and seals on both sides. The common part numbers for the bearings is 5707 and the seals are 8660S. [...]
View Details
Axles & Axle Bearings
Dodge Dana 60 Front 4X4 Outer Stub Axle 1994 1995 1996 1997 1998 1999
This is a genuine Dana front outer stub axle that fits 3/4 and 1 ton Dodge trucks from 1994-1999. It is 7.05″ long.
View Details
Axles & Axle Bearings
This is a genuine AAM wheel end kit that includes everything necessary to replace rear hub nearings and seals on 2011+ GM 1 ton trucks with the 11.5 diameter ring gear and dual rear wheels. These kits are great because of all the small parts that are included.
View Details