This is a genuine AAM axle shaft for 2003-2016 Dodge Ram 3500 with the 11.5 rear differential and dual rear wheels. This axle is 30 spline and 40.1″ or 1019mm long. The original Dodge part number for this axle is 05086984AB.
$135.00
This is a genuine AAM axle shaft for 2003-2016 Dodge Ram 3500 with the 11.5 rear differential and dual rear wheels. This axle is 30 spline and 40.1″ or 1019mm long. The original Dodge part number for this axle is 05086984AB.
| Weight | 28.0 lbs |
|---|---|
| Dimensions | 40 × 8 × 8 in |
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| Dodge Ram | 3500 | 2003 - 2004 |
| Dodge Ram | 3500 | 2005 - 2006 |
| Dodge Ram | 3500 | 2007 - 2008 |
| Dodge Ram | 3500 | 2009 - 2010 |
| Dodge Ram | 3500 | 2011 - 2012 |
| Dodge Ram | 3500 | 2013 - 2014 |
| Dodge Ram | 3500 | 2015 - 2016 |
There are no inquiries yet.
Axles & Axle Bearings
AAM 1992-2000 GM 8.5 8 1/2″ 10 Bolt Rear Axle Shaft 2wd 2 Wheel Drive 30 Spline 5 lug
This is a genuine AAM rear axle shaft that fits 2 wheel drive GM 1/2 ton trucks Suburban and Tahoe with the 8.5 rear differential 1992-2000 with rear drum brakes. This axle is 31 13/16″ long and 5 lug and 30 splines. This is a GM part number. The last digits of the part number [...]
View DetailsAxles & Axle Bearings
AAM Rear Axle Shaft 1988-1991 4X4 4wd GM Chevy Blazer Suburban 8.5 8 1/2 10 Bolt 6 Lug
This is a genuine AAM rear axle shaft that fits GM 4X4 Suburban and Blazer 1988-1991 that still used the straight front axle. This axle is 31 1/2″ long 30 spline and 6 lug. This is actually a GM part number. The last 4 digits are usually cast on the axle flange of the original [...]
View DetailsAxles & Axle Bearings
AAM Rear Axle Bearing & Seal kit 1/2 ton Chevy GMC Truck Tahoe Suburban 1990+
This is a genuine AAM axle bearing and seal kit for 1 side that fits 1990 and newer Chevy trucks and SUVs. This kit also includes a new c-clip for the axle. This is the same as bearing number 513067 and seal 4762N at your local parts store. 2 kits are required per vehicle.
View DetailsAxles & Axle Bearings
Ford Dana 50 & 60 Front 4X4 Outer Stub Axle 1998-2004 4X4 F250 F350 Excursion
This genuine Dana outer stub axle fits 1998-2004 Ford 3/4 and 1 ton trucks with either the Dana 50 or Dana 60 straight front axle. These were for the trucks with front hub assemblies rather than spindles with individual hub bearings. This axle is 9.39 long from the center of the u-joint out and 1.31 [...]
View DetailsAxles & Axle Bearings
Dodge Dana 60 Disconnect Middle Intermediate Axle 2000, 2001, 2002
This is a genuine Dana intermediate axle for a Dana 60 with a disconnect axle in a Dodge 3/4 or 1 ton truck from 2000-2002. This axle is set up for a larger slide collar than the earlier models. This axle runs from the slide collar out to the u-joint.
View DetailsAxles & Axle Bearings
AAM Dodge Ram 9.25 Front Axle Assembly RH Right 2010-2013 3/4 & 1 Ton 2500 3500 4X4
This is a genuine AAM right front axle assembly for the 2010-2013 Dodge Ram 2500 and 2500 series trucks with the 9.25 4X4 front axle. These use the 1555 series u-joints and come fully assembled as pictured. The Dodge part number is 68065426AB. This axle has been discontinued, but the individual components are still available [...]
View DetailsAxles & Axle Bearings
AAM 9.25 Dodge Ram RH Right Front Inner Axle Shaft 4X4 2003-2009
This is a genuine AAM right hand inner axle shaft for the front of a Dodge Ram 3/4 or 1 ton truck from 2003-2009. This axle is 38″ long from the center of the u-joint to the tip of the splines. This is set up for the 1485 series u-joint.
View DetailsAxles & Axle Bearings
AAM 1988-1991 GM 8.5 8 1/2″ 10 Bolt Rear Axle Shaft 2 Wheel Drive 5 Lug 2wd 30 Spline
This is a genuine AAM rear axle shaft that fits 2 wheel drive GM 1/2 ton trucks Suburban and Tahoe with the 8.5 rear differential 1988-1991. This axle is 31 3/8″ long and 6 lug and 30 splines. This is actually a GM part number and the last 4 digits are cast on the center [...]
View Details
Reviews
There are no reviews yet.