417-862-4455
2011+ Ford Super Duty F250 F350 4X4 Rear Driveshaft Slip Yoke 4464 Transfer Case
$129.00
- SKU: 3-3-17529X
- Brand: Dana/Spicer
- Weight: 6.0
- Shipping: Calculated at checkout
1 in stock
This is a genuine Dana/Spicer slip yoke for the transfer case on 2011+ Ford Super Duty trucks that use a slip yoke at the Borg Warner 4464 transfer case. The OE Ford part number is BC3Z4841C. This is for use with a 1410 u-joint and has 33 based on 34 splines.
| Weight | 6.0 lbs |
|---|---|
| Dimensions | 12 × 3 × 2 in |
General Inquiries
There are no inquiries yet.
Related products
Miscellaneous
GM 14 Bolt 10.5/11.5 Rear End Pinion Yoke Differential Full Float 1410 1415 Series U-Joint
This is an aftermarket Powertrain Industries pinion yoke for a 14 bolt with the 10.5″ or 11.5″ ring gear in a GM truck. This is the late style yoke with the sleeve on the seal surface. Can be used on all year trucks from 1973-current as long as you use the late pinion seal (26064030) [...]
View Details
Miscellaneous
This is a genuine AAM pinion flange yoke for the 10.5 and 11.5 14 bolt rear differential found in 2003+ Dodge 3/4 and 1 ton trucks. This is used with the 26064030 pinion seal. It already has the wear sleeve on the seal surface. This replaces the perfectly square ones found on some early models [...]
View Details
This is a genuine AAM front differential flanged yoke that fits 2014-2018 Dodge 3/4 and 1 ton trucks with the 9.25 AAM 4X4 front axle assembly. This fits the front differential with the 12 bolt cover. The Dodge part number for this yoke is 68214643AA.
View Details
This is a genuine AAM 1410 series rear pinion yoke for the GM 9.5 rear differential. This can also be used on the 8.5/8.6 10 bolt rear differential found in the 1/2 trucks form 1981-current. This is the later style yoke with the wear sleeve on the seal surface so you must use the late [...]
View Details
This is a genuine AAM driveshaft slip yoke for a 1555 series driveline in a 2006 and newer Dodge Ram 2500 or 3500 series truck. It measures 9.52756″ long (from center of u-joint) 2.29961″ O.D. (where it slips into the transfer case) and 1.74803″ 34 spline. This yoke has been discontinued from AAM and 40098344 [...]
View Details
This is a genuine AAM driveshaft flange yoke that shows to fit 2003+ Dodge Ram trucks with the 1485 series universal joints. This is the yoke that mates with the 40062272 pinion flange. Please be aware that the 40055983A casting number is the same on both the 1415 and 1485 series yokes.
View Details
This is a genuine AAM male slip yoke for the front of a GM transfer case, such as 246, 261, or 263. This is for the front driveline where it slips into the transfer case. This is for the 3R or 1344 series universal joint.
View Details
This is a genuine Dana/Spicer u-joint bolt and strap kit for the GM cars and trucks with the 3R or 1344 Saginaw series pinion yoke. The Saginaw uses inside snap rings to keep the u-joint centered in the yoke. Kit includes 2 straps and 4 bolts.
View Details