417-862-4455
2017+ Ford M300 Rear Axle Shaft 39.2″ 37 Spline F350 Super Duty
$235.00
- SKU: 10043615
- Brand: Dana/Spicer
- Weight: 24.0
- Shipping: Calculated at checkout
Out of stock
This is a genuine Dana/Spicer axle shaft that shows to fit some 2017 and newer Ford F350 trucks. It is 37 spline and 39.2″ long. This comes with the o-ring that seals the flange, and a set of axle flange bolts. The casting number on the axle flange is 2022975-5. The Ford part number is HC3Z4234K.
| Brand | Spicer |
| Axle Model | M300 |
| Material | Steel |
| Location | Rear |
| Length (IN) | 39.200 |
| Spline Count | 37 |
| Bolt Pattern | 8 X 0.134 |
| Wheel Stud Hole Diameter (IN) | 4.090 |
| Axle Shaft Included | Y |
| Axle Type | RH |
| Full-Floating Or Semi-Floating | Full-Floating |
| Quantity | 1 |
| Length (MM) | 995.700 |
| Package Type | EACH |
| Package Qty | 1 |
| Country of Origin |
United States |
| Weight | 24.0 lbs |
|---|---|
| Dimensions | 42 × 6 × 6 in |
General Inquiries
There are no inquiries yet.
Related products
Axles & Axle Bearings
2003-2018 Dodge Ram 3500 Dual Dually Rear Wheel Hub Bearing & Seal Kit 11.5
This is a genuine AAM rear axle hub bearing and seal kit the has all the parts necessary to replace bearings and seals on both sides for a Dodge Ram 3500 dually from 2003-2018 with the AAM 11.5 rear differential. The inner bearing is a 45291/45220 the outer bearing is a LM104949/LM104911 (A38). These kits [...]
View Details
Axles & Axle Bearings
This is a genuine AAM rear axle hub bearing kit that comes with everything necessary to replace bearings and seals on both sides. This kit fits all 2003-2018 Dodge Ram 2500 and 3500 series trucks with single rear wheels.
View Details
Axles & Axle Bearings
AAM Rear Axle Shaft 1988-1991 4X4 4wd GM Chevy Blazer Suburban 8.5 8 1/2 10 Bolt 6 Lug
This is a genuine AAM rear axle shaft that fits GM 4X4 Suburban and Blazer 1988-1991 that still used the straight front axle. This axle is 31 1/2″ long 30 spline and 6 lug. This is actually a GM part number. The last 4 digits are usually cast on the axle flange of the original [...]
View Details
Axles & Axle Bearings
AAM 9.25 Dodge Ram RH Right Front Inner Axle Shaft 4X4 2003-2009
This is a genuine AAM right hand inner axle shaft for the front of a Dodge Ram 3/4 or 1 ton truck from 2003-2009. This axle is 38″ long from the center of the u-joint to the tip of the splines. This is set up for the 1485 series u-joint.
View Details
Axles & Axle Bearings
AAM 1988-1991 GM 8.5 8 1/2″ 10 Bolt Rear Axle Shaft 2 Wheel Drive 5 Lug 2wd 30 Spline
This is a genuine AAM rear axle shaft that fits 2 wheel drive GM 1/2 ton trucks Suburban and Tahoe with the 8.5 rear differential 1988-1991. This axle is 31 3/8″ long and 6 lug and 30 splines. This is actually a GM part number and the last 4 digits are cast on the center [...]
View Details
Axles & Axle Bearings
AAM 9.25 Dodge Ram LH Left Front Inner Axle Shaft 4X4 2003-2009
This is a genuine AAM left hand inner axle shaft for the front of a Dodge Ram 3/4 or 1 ton truck from 2003-2009. This axle is 19 5/8″ long from the center of the u-joint to the tip of the splines. This is set up for the 1485 series u-joint.
View Details
Axles & Axle Bearings
1992-2005 Chevy GMC S10 S15 Axle Bearing & Seal Kit 7.5/7.6 GM7.5 GM7.6
This ia a genuine AAM axle bearing kit for the 7.5 and 7.6 rear axles found in 1992-2005 Chevy S10’s and Blazers also GMC S15’s. This kit includes all parts necessary to replace the axle bearings and seals on both sides. The common part numbers for the bearings is 5707 and the seals are 8660S. [...]
View Details
Axles & Axle Bearings
Dodge Dana 60 Disconnect Middle Intermediate Axle 2000, 2001, 2002
This is a genuine Dana intermediate axle for a Dana 60 with a disconnect axle in a Dodge 3/4 or 1 ton truck from 2000-2002. This axle is set up for a larger slide collar than the earlier models. This axle runs from the slide collar out to the u-joint.
View Details