417-862-4455
AAM Complete Master Overhaul kit 2004+ 7.6″ IFS Front Differential Chevy GMC Canyon Hummer H3 Colorado
$225.00
- SKU: R7.6IFS
- Brand: AAM American Axle Manufacturing
- Weight: 25.0
- Shipping: Calculated at checkout
2 in stock
This is actually a kit that we make up in-house, by combining a 74067006 basic bearing kit with a 74010004 master install kit. The combination of these 2 kits makes up the most complete kit available and includes virtually every bearing, seal, gasket, and bolt required to do the job. This is a much more complete kit than anything available in the aftermarket. This is for the 7.6 IFS front differential found in 2004 and newer 4X4 Chevy Colorado, GMC Canyon, and Hummer H3. For those unfamiliar with AAM, they are the OE manufacturer of these differentials for General Motors. PLEASE NOTE, THIS KIT NO LONGER INCLUDES THE SHIMS!!!
| Weight | 25.0 lbs |
|---|---|
| Dimensions | 14 × 14 × 8 in |
Be the first to review “AAM Complete Master Overhaul kit 2004+ 7.6″ IFS Front Differential Chevy GMC Canyon Hummer H3 Colorado”
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| GM/Chevy | Canyon | 2004 - 2005 |
| GM/Chevy | Canyon | 2006 - 2007 |
| GM/Chevy | Canyon | 2008 - 2009 |
| GM/Chevy | Canyon | 2010 - 2011 |
| GM/Chevy | Canyon | 2012 - 2013 |
| GM/Chevy | Canyon | 2014 |
| GM/Chevy | Colorado | 2004 - 2005 |
| GM/Chevy | Colorado | 2006 - 2007 |
| GM/Chevy | Colorado | 2008 - 2009 |
| GM/Chevy | Colorado | 2010 - 2011 |
| GM/Chevy | Colorado | 2012 - 2013 |
| GM/Chevy | Colorado | 2014 |
General Inquiries
There are no inquiries yet.
Related products
This master bearing and seal kit fits all Dodge 3/4 and 1 ton front differentials 2003 and newer with the AAM 9.25 front end. This is a genuine AAM kit. The kit from AAM does not include axle tube seals so we add them to this kit. This consists of a 74067022 bearing and seal [...]
View Details
Bearing Kits
261XHD & 263XHD GM Transfer Case Bearing and Seal Rebuild Kit Chevy 1999-2007 Duramax 6.6
This bearing and seal kit fits 261XHD and 263XHD transfer cases in 3/4 and 1 ton GM trucks with the 8.1 gas or Duramax diesel engines. It is a very complete kit including all the bearings and seals as well as thrust washers for the input/planetary, fork inserts for the 263XHD range fork, and even [...]
View Details
This is a genuine AAM differential bearing kit for the GM 8.6 rear differential found in 1999-2005 1/2 ton trucks and SUVs with disc brakes and 2006-2008 with disc or drum brakes.
View Details
This is a genuine AAM differential bearing kit for the late (2000 or newer) GM 7.6 front or rear differential. This kit has all the same bearings as the 1982 and newer GM 7.5, but the pinion seal is different. This has the pinion seal is for the yoke with the wear sleeve made on [...]
View Details
This is an aftermarket bearing kit for the 10.5 rear differential in some 2003 and newer Dodge Ram 2500 series trucks. AAM has actually discontinued this kit, so we get them from USA Standard. This kit uses a combination of Timken and Koyo bearings and also includes a crush sleeve, pinion seal, nut and washer..
View Details
Bearing Kits
Master Bearing Rebuild Overhaul Kit GM 8.6 IRS Camaro Rear Differential 2010+ 218MM AAM
This is a genuine AAM differential bearing kit for 2010 and newer V8 Camaro’s with the 8.6 or 218mm independent rear differential.
View Details
This bearing and seal kit fits all Dodge NV4500 transmissions and GM NV4500 transmissions with the external slave cylinder up to 1995. This kit has all the seals, tapered bearings and races as well as the mainshaft pilot and thrust bearing and countershaft front plug. This kit does not include the caged needle bearings underneath [...]
View Details
This is a genuine Dana differential side bearing kit for the Dana 70HD or Dana 80 rear differentials. This is also used on the Ford 10.25 and 10.5 rear differentials. This kit includes 2 453X races and 2 469 bearings.
View Details
Reviews
There are no reviews yet.