This is a genuine Morse chain for the Borg Warner 4417 transfer case found in Ford Expedition and Lincoln Navigator’s. It is 1 1/4″ wide and 42 links
Borg Warner 4417 Transfer Case Chain Lincoln Navigator Ford Expedition
$110.00
- SKU: HV076
- Brand: Morse Chain
- Weight: 5.0
- Shipping: Calculated at checkout
Weight | 5.0 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Borg Warner 4417 Transfer Case Chain Lincoln Navigator Ford Expedition”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Ford | Expedition | 2000 - 2001 |
Ford | Expedition | 2002 - 2003 |
Ford | Expedition | 2004 - 2005 |
Related products
Transfer Case Parts
This range fork fits all versions of the 263 GM transfer case including 263XHD. This is the updated fork for use with the 43681 range slider with the wider groove for the shift fork. If your transfer case is 2002 or older you may have to update the slider as well. This fork does not [...]
View DetailsTransfer Case Parts
10 spline coupler for early GM 205 transfer case to 4 speed standard transmission 4 1/4″ long.
10 spline female coupler for early HM 205 transfer cases used behind 4 speed manual transmission.
View DetailsTransfer Case Parts
This range hub fits all 241DHD transfer cases with the PTO opening on the side of the transmission. This is used with 17520 snap ring and 17522 range collar.
View DetailsTransfer Case Parts
This is the outer synchronizer ring for a 261 or 263 GM transfer case. This is the outside ring part of a 3 piece synchronizer pack.
View DetailsTransfer Case Parts
GM NP261HD and NP263HD GM Transfer Case Chain Chevy 1999-2007
This Morse chain fits mots 261HD and 263HD GM transfer cases. It is 1 1/2″ wide and 49 links. Be sure to check your chain before ordering as I have seen the HV072 or HV074 chains in these units.
View DetailsTransfer Case Parts
29 Spline Input Shaft 241DHD/241DLD Transfer Case Dodge 241 Wide Bearing
This 29 spline input shaft fits all 241 Dodge transfer cases including 241DLD and 241DHD with the fine tooth planetaries (1995 and newer). It is set up for the wide (BD50-8 or N5210KLB) bearing. We also have a 29 spline input for 241DHD only with the narrow input bearing (110L or 6010N) if you prefer. [...]
View DetailsThis bearing and seal kit fits all 261 & 263 GM transfer cases from 1999-2007, except the XHD versions found behind the 8.1 or Duramax engines. They are very complete including all the seals and bearings as well as input/planetary thrust washers and fork inserts for the 263 and a transfer case mounting gasket.
View DetailsTransfer Case Parts
This Morse chain fits 261XHD (manual shift), and 263XHD (electric shift) transfer cases found in GM trucks with the 8.1 gas or Duramax diesel engine and ZF 6 speed transmission or Allison automatic transmission.
View Details
Reviews
There are no reviews yet.