This is a genuine Dana/Spicer drive flange kit for a Dana 60 4X4 front axle with 35 spline outer axles. Most factory outer axles were 30 spline. These fit GM, Ford, and Dodge applications with 55 internal splines in the hubs.
DANA 60 FRONT 35 SPLINE CHROMOLY DRIVE FLANGES 4X4 Front Axle Chevy Ford Dodge
$285.00
- SKU: 10028883
- Brand: Dana/Spicer
- Weight: 8.0
- Shipping: Calculated at checkout
1 in stock
Weight | 8.0 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Related products
Axles & Axle Bearings
Chevrolet Astro GMC Safari Van Minivan Rear Axle Bearing Kit 7.5/7.6 1990-2002 AAM
This is a genuine AAM axle bearing kit for the rear of the Chevrolet Astro or GMC Safari minivans with the 7.5 or 7.6 rear differential from 1990-2002. The industry numbers are 513023 (bearings) and 4795V (seals). This kit includes bearings and seals for both sides as well as axle c-clips, and is much cheaper [...]
View DetailsAxles & Axle Bearings
AAM Dodge Ram 9.25 Front Axle Assembly LH Left 2010-2013 3/4 & 1 Ton 2500 3500 4X4
This is a genuine AAM leftt front axle assembly for the 2010-2013 Dodge Ram 2500 and 2500 series trucks with the 9.25 4X4 front axle. These use the 1555 series u-joints and come fully assembled as pictured. The Dodge part number is 68065427AB.
View DetailsAxles & Axle Bearings
Dana 44 60 Dodge Disconnect Slide Collar Front Differential Axle 4X4 Ram 1500 2500 3500 Jeep
This genuine Dana slide collar fits most Dodge Dana 44 and 60 front disconnect axles up to 1999. 2000+ Dodge Dana 60’s used a larger splined slide collar which is not available from Dana. This also fit’s many Jeep applications with the disconnect front axle.
View DetailsAxles & Axle Bearings
This is a genuine Dana right hand inner axle for the disconnect side of a Dodge 3/4 or 1 ton truck. This is the one that runs from the differential to the discconnect on the passenger side front axle. this fits trucks from 1994-1999. If you are unsure of the part number you can call [...]
View DetailsAxles & Axle Bearings
Ford Dana 50 & 60 Front 4X4 Outer Stub Axle 1998-2004 4X4 F250 F350 Excursion
This genuine Dana outer stub axle fits 1998-2004 Ford 3/4 and 1 ton trucks with either the Dana 50 or Dana 60 straight front axle. These were for the trucks with front hub assemblies rather than spindles with individual hub bearings. This axle is 9.39 long from the center of the u-joint out and 1.31 [...]
View DetailsAxles & Axle Bearings
AAM Rear Axle Shaft 1988-1991 4X4 4wd GM Chevy Blazer Suburban 8.5 8 1/2 10 Bolt 6 Lug
This is a genuine AAM rear axle shaft that fits GM 4X4 Suburban and Blazer 1988-1991 that still used the straight front axle. This axle is 31 1/2″ long 30 spline and 6 lug. This is actually a GM part number. The last 4 digits are usually cast on the axle flange of the original [...]
View DetailsAxles & Axle Bearings
Dodge Dana 60 Disconnect Middle Intermediate Axle 2000, 2001, 2002
This is a genuine Dana intermediate axle for a Dana 60 with a disconnect axle in a Dodge 3/4 or 1 ton truck from 2000-2002. This axle is set up for a larger slide collar than the earlier models. This axle runs from the slide collar out to the u-joint.
View DetailsAxles & Axle Bearings
This is a genuine AAM wheel end kit that includes everything necessary to replace rear hub nearings and seals on 2011+ GM 1 ton trucks with the 11.5 diameter ring gear and dual rear wheels. These kits are great because of all the small parts that are included.
View Details