417-862-4455
Dana 60 Trac Lok Internal Kit GM Ford Dodge Chevy 1.5-35 Spline Axle Gear Posi Track Limited Slip
$225.00
- SKU: 84184
- Brand: Dana/Spicer
- Weight: 11.0
- Shipping: Calculated at checkout
Out of stock
This is a genuine Dana/Spicer internal kit for a Dana 60 Trac Lok limited slip differential with 1.5″-35 spline axles. This fits many common domestic application. As always, if you are unsure of the part number that you need for your application, you can email us with your differential tag number and we can help.
| Weight | 11.0 lbs |
|---|---|
| Dimensions | 12 × 12 × 3 in |
General Inquiries
There are no inquiries yet.
Related products
Dana 60/70 Power-Loc Clutches Dana 60 and Dana 70; Includes Clutches And Steels; Includes Clutches For Both Side Gears Dana Spicer Dana 60/70 Power-Loc Clutches Locking Differential Clutch Pack. The new Dana part number is 2021288, but we still stock it under the original part number 707075X.
View Details
This is a genuine Dana 35 clutch pack for a Track Lok differential in a Jeep. This kit includes enough clutches to do both sides. This kit will also fit the Dodge 8.25 rear differential with a Track Lok differential.
View Details
Cases & Spiders
This is a genuine Dana clutch pack for a Dana 60 Trac Lok differential. This kit includes enough clutches to do both sides.
View Details
Cases & Spiders
This is a genuine AAM loaded open differential carrier assembly that fit the GM 7.6 or 7 5/8″ rear differential with 28 spline axles and 3:23 or numerically higher (3:42, 3:73, etc.). These were used in early 1990’s and newer S10’s and Camaro’s.
View Details
Cases & Spiders
Dana 44 Dodge 9.25 Clutch Pack Track Lok 1968-2010 C9.25 Posi Track 708203 Differential
This is a genuine Dana clutch pack for a Dana 44 Trac Lok differential or a Dodge with a 9.25 rear posi track differential. The new Dana part number is 708203, but we still use the original part number 706352X. This fits 9.25 Dodge rear ends from 1968-2010. It does not fit 2011+ Dodge 9.25ZF [...]
View Details
This is a genuine AAM differential carrier for the 9.25 front axle found in 2007 and newer Dodge Ram 3/4 and 1 ton trucks. This one is made for the spider gears that are concave on the outside as opposed to the flat ones found in 2003-2006.
View Details
This is a genuine AAM spider gear kit that fits GM trucks with the 9.25 front or 9.5 rear 14 bolt 33 spline open differentials. These are for all years in GM applications and from 2003-2006 in Dodge 3/4 and 1 ton front differentials. Note that the small pinion gears are flat and use 1/4″ [...]
View Details
Cases & Spiders
This is a genuine AAM bare open differential carrier assembly that fit the GM 7.6 or 7 5/8″ rear differential with 28 spline axles and 3:23 or numerically higher (3:42, 3:73, etc.). These were used in early 1990’s and newer S10’s and Camaro’s.
View Details