This is a genuine Dana/Spicer pinion seal for the Dana 30 4X4 front axle or Dana 44 rear axle found in 2001-2006 Jeep TJ Wrangler’s. May fit other applications as well.
Dana Spicer Pinion Seal 50660 Jeep Dana 30 Front Axle TJ 2001-2006 4X4 Wrangler Dana 44 Rear
$9.00
- SKU: 50660
- Brand: Dana/Spicer
- Weight: .30
- Shipping: Calculated at checkout
| Weight | .30 lbs |
|---|---|
| Dimensions | 3 × 3 × 1 in |
General Inquiries
There are no inquiries yet.
Related products
Small Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View DetailsSmall Parts & Seals
This is the outer axle nut washer that goes with the 46085 axle nut on 4X4 Dodge front axles, this fits Dana 44 and 60 as well as the AAM 9.25 front axle found in 2003 and newer Dodge Ram 2500 and 3500 series trucks.
View DetailsSmall Parts & Seals
2003+ Dodge Ram 3500 Dual Dually Rear Wheel Hub Seal 11.5 AAM
This is a genuine rear wheel hub seal for 2003 and newer Dodge 1 ton trucks with either the 11.5 rear axle and dual rear wheels. This part number is actually on the seal itself. The National seal part number is 710563.
View DetailsSmall Parts & Seals
Ford Straight 4X4 Front Axle Tube Dust Seal 2006+ Dana 50 & 60 F250 F350
This genuine Dana axle tube dust seal fits 2006 and newer Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FES 5M-15197 and 53877. These are approx. 3.450″ outside diameter, which is larger than the earlier ones. This seal goes on the axle itself right behind the u-joint at [...]
View DetailsSmall Parts & Seals
These axle tube seals fit 2003+ Dodge Ram 2500/3500 series 4X4 front ends with the 9.25 front axle. This is an AAM part. These are sold individually. The newest AAM part number for this seal is 40201742.
View DetailsSmall Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket. The newest Dana part number for this yoke is 2001855.
View DetailsSmall Parts & Seals
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 3/4 and 1 ton trucks with either a 10.5 or 11.5 ring gear. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used [...]
View DetailsThis is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View Details
417-862-4455

