417-862-4455
Dodge Ram 36 Spline Slip Yoke Driveshaft at Carrier Bearing 2003-2018 1555
$160.00
- SKU: 40038044
- Brand: AAM American Axle Manufacturing
- Weight: 7.0
- Shipping: Calculated at checkout
1 in stock
This is a genuine AAM 36 spline slip yoke in a 1555 series, that fits Dodge Ram 3500 trucks from 2003-2018. This is the one for the middle of the driveshaft, at the carrier bearing. This mates with 40038581 stub shaft. Please note thtis is a variable part that does not fitll all trucks.
| Weight | 7.0 lbs |
|---|---|
| Dimensions | 10 × 4 × 4 in |
General Inquiries
There are no inquiries yet.
Related products
This is a genuine AAM driveshaft flange yoke that shows to fit 2003+ Dodge Ram trucks with the 1485 series universal joints. This is the yoke that mates with the 40062272 pinion flange. Please be aware that the 40055983A casting number is the same on both the 1415 and 1485 series yokes.
View Details
This is a genuine AAM driveshaft slip yoke for a 1555 series driveline in a 2006 and newer Dodge Ram 2500 or 3500 series truck. It measures 9.52756″ long (from center of u-joint) 2.29961″ O.D. (where it slips into the transfer case) and 1.74803″ 34 spline. This yoke has been discontinued from AAM and 40098344 [...]
View Details
This is a genuine AAM male slip yoke for the front of a GM transfer case, such as 246, 261, or 263. This is for the front driveline where it slips into the transfer case. This is for the 3R or 1344 series universal joint.
View Details
Miscellaneous
GM 14 Bolt 10.5/11.5 Rear End Pinion Yoke Differential Full Float 1410 1415 Series U-Joint
This is an aftermarket Powertrain Industries pinion yoke for a 14 bolt with the 10.5″ or 11.5″ ring gear in a GM truck. This is the late style yoke with the sleeve on the seal surface. Can be used on all year trucks from 1973-current as long as you use the late pinion seal (26064030) [...]
View Details
This is a genuine Dana pinion yoke flange for a Dana 80 in a Ford truck. The Ford part number was BC3Z4851B. If you aren’t sure of your part number feel free to contact us with your differential tag number and we can check for you.
View Details
Yokes
GM 8.6 Pinion Yoke 8.6 10 Bolt Rear Differential 1999+ 3R Series U-Joint Inside Snap Rings Chevy
This is a genuine AAM pinion yoke that fits the GM 10 bolt rear differential with the 8.6″ ring gear found in Chevy trucks from 1999+. This is for the 3R series u-joint with inside snap rings. This is the late style yoke with the factory wear sleeve on it. This can be used in [...]
View Details
This is a genuine AAM front driveshaft flange yoke for the 4X4 front driveshaft found in 2003 and newer Dodge Ram 2500 and 3500 series trucks. This yoke is serrated and made to mate with the serrated front pinion yoke.
View Details
This is a genuine AAM pinion yoke that fits all GM 7.5/7.6/8.0 rear differentials. These were found in S10’s, Camaro’s, and Trailblazers. This is the later style yoke with the wear sleeve made on it, so you will have to use the 1998+ pinion seal. This is for the 1344 or 3R series u-joint with [...]
View Details