This is a genuine Koyo axle bearing that fits many Ford 8″ and 9″ rear axle shafts. Many common applications were Ford cars with 28 spline axles, and early Bronco’s with 28 spline axles. This is considdered the “small” bearing. It is 1.378″ ID and 2.835″ OD. These bearings are made in Japan, and are higher quality than the Chinese bearings found in most auto parts stores or on Ebay. This bearing is sealed on both sides and includes the lock ring that presses on against the bearing.
Ford 8″ and 9″ Axle Wheel Bearing – RW207CCRA – 1.378″ ID and 2.835″ OD – Small Bearing
$19.95
- SKU: RW207CCRA
- Brand: Koyo
- Weight: 1.0
- Shipping: Calculated at checkout
2 in stock
| Weight | 1.0 lbs |
|---|---|
| Dimensions | 3 × 3 × 1 in |
General Inquiries
There are no inquiries yet.
Related products
Axles & Axle Bearings
This is a genuine Dana right hand inner axle for the disconnect side of a Dodge 3/4 or 1 ton truck. This is the one that runs from the differential to the discconnect on the passenger side front axle. this fits trucks from 1994-1999. If you are unsure of the part number you can call [...]
View DetailsAxles & Axle Bearings
AAM Rear Axle Bearing & Seal kit 1/2 ton Chevy GMC Truck Tahoe Suburban 1990+
This is a genuine AAM axle bearing and seal kit for 1 side that fits 1990 and newer Chevy trucks and SUVs. This kit also includes a new c-clip for the axle. This is the same as bearing number 513067 and seal 4762N at your local parts store. 2 kits are required per vehicle.
View DetailsAxles & Axle Bearings
AAM 1992-2000 GM 8.5 8 1/2″ 10 Bolt Rear Axle Shaft 2wd 2 Wheel Drive 30 Spline 5 lug
This is a genuine AAM rear axle shaft that fits 2 wheel drive GM 1/2 ton trucks Suburban and Tahoe with the 8.5 rear differential 1992-2000 with rear drum brakes. This axle is 31 13/16″ long and 5 lug and 30 splines. This is a GM part number. The last digits of the part number [...]
View DetailsAxles & Axle Bearings
Dodge Dana 60 Disconnect Middle Intermediate Axle 2000, 2001, 2002
This is a genuine Dana intermediate axle for a Dana 60 with a disconnect axle in a Dodge 3/4 or 1 ton truck from 2000-2002. This axle is set up for a larger slide collar than the earlier models. This axle runs from the slide collar out to the u-joint.
View DetailsAxles & Axle Bearings
Dodge Dana 60 Front 4X4 Outer Stub Axle 1994 1995 1996 1997 1998 1999
This is a genuine Dana front outer stub axle that fits 3/4 and 1 ton Dodge trucks from 1994-1999. It is 7.05″ long.
View DetailsAxles & Axle Bearings
Ford Dana 50 & 60 Front 4X4 Outer Stub Axle 1998-2004 4X4 F250 F350 Excursion
This genuine Dana outer stub axle fits 1998-2004 Ford 3/4 and 1 ton trucks with either the Dana 50 or Dana 60 straight front axle. These were for the trucks with front hub assemblies rather than spindles with individual hub bearings. This axle is 9.39 long from the center of the u-joint out and 1.31 [...]
View DetailsAxles & Axle Bearings
AAM 9.25 Dodge Ram RH Right Front Inner Axle Shaft 4X4 2003-2009
This is a genuine AAM right hand inner axle shaft for the front of a Dodge Ram 3/4 or 1 ton truck from 2003-2009. This axle is 38″ long from the center of the u-joint to the tip of the splines. This is set up for the 1485 series u-joint.
View DetailsAxles & Axle Bearings
AAM Dodge 9.25 Front Outer Stub Axle 2003-2008 C9.25 Ram 2500 3500
This is a genuine AAM outer stub axle for the front of a 3/4 or 1 ton Dodge truck 2003-2008. These are for the 1485 series u-joint. This axle comes with a new nut and washer.
View Details
417-862-4455


