417-862-4455
GM 7.25 IFS FRONT DIFFERENTIAL OUTPUT SEAL KIT TRAILBLAZER OIL PAN MOUNTED AAM
$27.25
- SKU: 74050001
- Brand: AAM American Axle Manufacturing
- Weight: .80
- Shipping: Calculated at checkout
5 in stock
This is a genuine AAM output shaft seal kit for the 7.25IFS differential that mounts to the drivers side of the oil pan in 2002-2009 GM SUV’s including the Trailblazer and Envoy. This kit includes the 2 seals, and the 2 support bearings for the axles.
| Weight | .80 lbs |
|---|---|
| Dimensions | 6 × 4 × 2 in |
Be the first to review “GM 7.25 IFS FRONT DIFFERENTIAL OUTPUT SEAL KIT TRAILBLAZER OIL PAN MOUNTED AAM”
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| GM/Chevy | Envoy | 2002 - 2003 |
| GM/Chevy | Envoy | 2004 - 2005 |
| GM/Chevy | Envoy | 2006 - 2007 |
| GM/Chevy | Envoy | 2008 - 2009 |
| GM/Chevy | Trailblazer | 2002 - 2003 |
| GM/Chevy | Trailblazer | 2004 - 2005 |
| GM/Chevy | Trailblazer | 2006 - 2007 |
| GM/Chevy | Trailblazer | 2008 - 2009 |
General Inquiries
There are no inquiries yet.
Related products
Axles & Axle Bearings
These are genuine Dana outer stub axles that show to fit 2000-2002 Dodge 3/4 and 1 ton trucks with the Dana 60 front differentials. These are 1.41 33 spline and 7.39 from the center of the u-joint to the tip of the threads. If you aren’t sure about the part number for you application you [...]
View Details
Axles & Axle Bearings
This is a genuine Dana right hand inner axle for the disconnect side of a Dodge 3/4 or 1 ton truck. This is the one that runs from the differential to the discconnect on the passenger side front axle. this fits trucks from 1994-1999. If you are unsure of the part number you can call [...]
View Details
Axles & Axle Bearings
This genuine Dana front outer stub axle fits Dodge 1/2 ton trucks from 1994-2001 with the Dana 44 front axle. this axle is 6.77 long from the center of the u-joint to the tip of the splines and is 1.41 33 spline. If you are not sure of this part number you can call or [...]
View Details
Axles & Axle Bearings
AAM Rear Axle Shaft 1988-1991 4X4 4wd GM Chevy Blazer Suburban 8.5 8 1/2 10 Bolt 6 Lug
This is a genuine AAM rear axle shaft that fits GM 4X4 Suburban and Blazer 1988-1991 that still used the straight front axle. This axle is 31 1/2″ long 30 spline and 6 lug. This is actually a GM part number. The last 4 digits are usually cast on the axle flange of the original [...]
View Details
Axles & Axle Bearings
AAM 1988-1991 GM 8.5 8 1/2″ 10 Bolt Rear Axle Shaft 2 Wheel Drive 5 Lug 2wd 30 Spline
This is a genuine AAM rear axle shaft that fits 2 wheel drive GM 1/2 ton trucks Suburban and Tahoe with the 8.5 rear differential 1988-1991. This axle is 31 3/8″ long and 6 lug and 30 splines. This is actually a GM part number and the last 4 digits are cast on the center [...]
View Details
Axles & Axle Bearings
AAM Rear Axle Bearing & Seal kit 1/2 ton Chevy GMC Truck Tahoe Suburban 1990+
This is a genuine AAM axle bearing and seal kit for 1 side that fits 1990 and newer Chevy trucks and SUVs. This kit also includes a new c-clip for the axle. This is the same as bearing number 513067 and seal 4762N at your local parts store. 2 kits are required per vehicle.
View Details
Axles & Axle Bearings
AAM 1999+ GM 9.5 9 1/2″ 14 Bolt Rear Axle Shaft 2 Wheel Drive 2wd or 4wd 33 Spline 8 Lug Disc Brakes
This is a genuine AAM rear axle shaft that fits some 2 or 4 wheel drive GM 3/4 ton trucks with the 9.5 rear differential 1999-2004 with rear disc brakes. This axle is 33 1/2″ long and 8 lug and 33 splines. Please check length or part number before ordering as there are several different [...]
View Details
Axles & Axle Bearings
AAM Dodge 9.25 Front Outer Stub Axle 2003-2008 C9.25 Ram 2500 3500
This is a genuine AAM outer stub axle for the front of a 3/4 or 1 ton Dodge truck 2003-2008. These are for the 1485 series u-joint. This axle comes with a new nut and washer.
View Details
Reviews
There are no reviews yet.