417-862-4455
GM Chevy 14 Bolt 10.5 Rear Axle Shaft 30 Spline 38.98″ 2500 3500
$125.00
- SKU: 10024293
- Brand: SVL
- Weight: 22.0
- Shipping: Calculated at checkout
1 in stock
REAR AXLE SHAFT – GM 10.5 AXLE – 14 BOLT – 30 SPLINE – SHAFT LENGTH 38.98 IN.
| Brand | SVL |
| Axle Model | GM 10.5 |
| Material | Steel |
| Axle Cover Bolt Hole Qty | 14 |
| Location | RH |
| Axle Length (In) | 38.980 |
| Length (IN) | 38.980 |
| Spline Count | 30 |
| Axle Spline Count | 30 |
| Bolt Pattern | 8 X 3.56 |
| Wheel Stud Hole Diameter (In) | 0.541 |
| Bearing Pilot Diameter (In) | 1.339 |
| Includes Tone | N |
| Axle Length (Mm) | 990.092 |
| Weight | 22.0 lbs |
|---|---|
| Dimensions | 40 × 6 × 6 in |
General Inquiries
There are no inquiries yet.
Related products
Axles & Axle Bearings
AAM 1999+ GM 9.5 9 1/2″ 14 Bolt Rear Axle Shaft 2 Wheel Drive 2wd or 4wd 33 Spline 8 Lug Disc Brakes
This is a genuine AAM rear axle shaft that fits some 2 or 4 wheel drive GM 3/4 ton trucks with the 9.5 rear differential 1999-2004 with rear disc brakes. This axle is 33 1/2″ long and 8 lug and 33 splines. Please check length or part number before ordering as there are several different [...]
View Details
Axles & Axle Bearings
AAM Rear Axle Shaft 1988-1991 4X4 4wd GM Chevy Blazer Suburban 8.5 8 1/2 10 Bolt 6 Lug
This is a genuine AAM rear axle shaft that fits GM 4X4 Suburban and Blazer 1988-1991 that still used the straight front axle. This axle is 31 1/2″ long 30 spline and 6 lug. This is actually a GM part number. The last 4 digits are usually cast on the axle flange of the original [...]
View Details
Axles & Axle Bearings
AAM 9.25 Dodge Ram LH Left Front Inner Axle Shaft 4X4 2003-2009
This is a genuine AAM left hand inner axle shaft for the front of a Dodge Ram 3/4 or 1 ton truck from 2003-2009. This axle is 19 5/8″ long from the center of the u-joint to the tip of the splines. This is set up for the 1485 series u-joint.
View Details
Axles & Axle Bearings
This is a genuine AAM wheel end kit that includes everything necessary to replace rear hub nearings and seals on 2011+ GM 1 ton trucks with the 11.5 diameter ring gear and dual rear wheels. These kits are great because of all the small parts that are included.
View Details
Axles & Axle Bearings
AAM Dodge Ram 9.25 Front Axle Assembly LH Left 2010-2013 3/4 & 1 Ton 2500 3500 4X4
This is a genuine AAM leftt front axle assembly for the 2010-2013 Dodge Ram 2500 and 2500 series trucks with the 9.25 4X4 front axle. These use the 1555 series u-joints and come fully assembled as pictured. The Dodge part number is 68065427AB.
View Details
Axles & Axle Bearings
Dodge Dana 60 Disconnect Middle Intermediate Axle 2000, 2001, 2002
This is a genuine Dana intermediate axle for a Dana 60 with a disconnect axle in a Dodge 3/4 or 1 ton truck from 2000-2002. This axle is set up for a larger slide collar than the earlier models. This axle runs from the slide collar out to the u-joint.
View Details
Axles & Axle Bearings
GM 10.5/11.5 Single Rear Wheel Hub Bearing Kit 2001-2010 Chevrolet 2500 3500 AAM Axle
This is a genuine AAM rear axle hub bearing kit that will do both sides on a 2001-2010 GM 3/4 or 1 ton truck with either the 10.5 or 11.5 rear axle and single rear wheels. These kits are great because they have everything that you could possibly need to do the job.
View Details
Axles & Axle Bearings
This is a genuine AAM rear axle hub bearing kit that comes with everything necessary to replace bearings and seals on both sides. This kit fits all 2003-2018 Dodge Ram 2500 and 3500 series trucks with single rear wheels.
View Details