This is a brand new AAM aluminum differential case 1/2 for the drivers side of GM trucks with the 9.25IFS 4X4 front differential. It is a bare casting and all parts from your original housing will have to be transferred over including the rubber mounting bushings. These are for 1988 and newer with the IFS. Please note the location of the oil return hole for the outer pinion bearing. Some housings were drilled at a 45 degree angle and the other case half did not go up far enough to cover the hole on this housing. We have had customers redrill the oil return hole and tap the existing hole for a plug.
|
GM9.25IFS Differential Aluminum Case 1/2 Half Left Side Front Chevy 9.25 IFS Drivers 4X4 Front 1988-2011
$250.00
- SKU: 40150159
- Brand: AAM American Axle Manufacturing
- Weight: 17
- Shipping: Calculated at checkout
Weight | 17 lbs |
---|---|
Dimensions | 20 × 18 × 12 in |
Related products
This is a genuine AAM Axle Gear kit that fits all year GM and Dodge trucks with the 11.5 rear differential. This will only work with a factory open carrier and not a posi or limited slip.
View DetailsThis is a genuine Dana clutch pack for a Dana 44 Trac Lok differential or a Dodge with a 9.25 rear posi track differential. The new Dana part number is 708203, but we still use the original part number 706352X.
View DetailsThis is a genuine AAM differential carrier for the 9.25 front axle found in 2007 and newer Dodge Ram 3/4 and 1 ton trucks. This one is made for the spider gears that are concave on the outside as opposed to the flat ones found in 2003-2006.
View DetailsThis is a genuine AAM spider gear kit that fits GM trucks with the 9.25 front or 9.5 rear 14 bolt 33 spline open differentials. These are for all years in GM applications and from 2003-2006 in Dodge 3/4 and 1 ton front differentials. Note that the small pinion gears are flat and use 1/4″ [...]
View DetailsCases & Spiders
This is a genuine AAM bare open differential carrier assembly that fit the GM 7.6 or 7 5/8″ rear differential with 28 spline axles and 3:23 or numerically higher (3:42, 3:73, etc.). These were used in early 1990’s and newer S10’s and Camaro’s.
View DetailsThis is a genuine AAM internal kit for 2003 and newer Dodge Ram 2500 trucks with the 10.5 ring gear and open carrier. These will not work in a posi or limited slip differential.
View DetailsThis is a genuine AAM spider gear kit for the 10.5 rear differential found in 1999 and newer Ford F250 and F350 trucks. This is for the 3 pinion gear setup and is for the open differential, not for the limited slip differential. For some reason the Y or cross is not included with this [...]
View DetailsThis is a genuine AAM spider gear kit that fits GM trucks with the 8.5 10 bolt 30 spline open differentials from 1989-1999 and drum brakes. This will not work in a posi trac or limited slip carrier.
View Details