417-862-4455
Jeep Dana 35 Rear Axle Bearing Press-On Grand Cherokee A9 SET9
$25.00
- SKU: 566075
- Brand: Dana/Spicer
- Weight: 1.0
- Shipping: Calculated at checkout
This is a genuine Dana/Spicer press on axle bearing for the Dana 35 rear axle in some Jeep’s. This is the same as the aftermarket part number A9, except it does not include the press on ring (36121) which we also have available. The number on the bearing is NP182140 and the number on the race is NP645406. The inside diameter is 1.368″. This uses seal 35938.
| Weight | 1.0 lbs |
|---|---|
| Dimensions | 3 × 3 × 1 in |
General Inquiries
There are no inquiries yet.
Related products
Axles & Axle Bearings
Dana 44 60 Dodge Disconnect Slide Collar Front Differential Axle 4X4 Ram 1500 2500 3500 Jeep
This genuine Dana slide collar fits most Dodge Dana 44 and 60 front disconnect axles up to 1999. 2000+ Dodge Dana 60’s used a larger splined slide collar which is not available from Dana. This also fit’s many Jeep applications with the disconnect front axle.
View Details
Axles & Axle Bearings
GM 10.5/11.5 Single Rear Wheel Hub Bearing Kit 2001-2010 Chevrolet 2500 3500 AAM Axle
This is a genuine AAM rear axle hub bearing kit that will do both sides on a 2001-2010 GM 3/4 or 1 ton truck with either the 10.5 or 11.5 rear axle and single rear wheels. These kits are great because they have everything that you could possibly need to do the job.
View Details
Axles & Axle Bearings
AAM Rear Axle Shaft 2 or 4 Wheel Drive 1999-2007 GM Chevy 1/2 ton Trucks SUV’s 8.6 10 Bolt 6 Lug
This is a genuine AAM rear axle shaft that fits GM 1/2 ton trucks Suburban and Tahoe with the 8.6 rear differential 1999-2005 with rear disc brakes and 2006-2007 with rear disc or drum Brakes. This axle fits 2 and 4 wheel drive applications. This axle is 33 9/16″ long and 6 lug. This axle [...]
View Details
Axles & Axle Bearings
AAM 1999+ GM 9.5 9 1/2″ 14 Bolt Rear Axle Shaft 2 Wheel Drive 2wd or 4wd 33 Spline 8 Lug Disc Brakes
This is a genuine AAM rear axle shaft that fits some 2 or 4 wheel drive GM 3/4 ton trucks with the 9.5 rear differential 1999-2004 with rear disc brakes. This axle is 33 1/2″ long and 8 lug and 33 splines. Please check length or part number before ordering as there are several different [...]
View Details
Axles & Axle Bearings
This genuine Dana front outer stub axle fits Dodge 1/2 ton trucks from 1994-2001 with the Dana 44 front axle. this axle is 6.77 long from the center of the u-joint to the tip of the splines and is 1.41 33 spline. If you are not sure of this part number you can call or [...]
View Details
Axles & Axle Bearings
AAM Dodge 9.25 Left LH Front 4X4 Axle Assembly 2003-2008 C9.25 Ram 2500 3500
This is a genuine AAM left hand axle assembly for the front of a 3/4 or 1 ton Dodge truck 2003-2008. These are for the 1485 series u-joint. The tag has the Dodge part number 5086667AB for reference.
View Details
Axles & Axle Bearings
AAM 9.25 Dodge Ram RH Right Front Inner Axle Shaft 4X4 2003-2009
This is a genuine AAM right hand inner axle shaft for the front of a Dodge Ram 3/4 or 1 ton truck from 2003-2009. This axle is 38″ long from the center of the u-joint to the tip of the splines. This is set up for the 1485 series u-joint.
View Details
Axles & Axle Bearings
Ford Dana 50 & 60 Front 4X4 Outer Stub Axle 1998-2004 4X4 F250 F350 Excursion
This genuine Dana outer stub axle fits 1998-2004 Ford 3/4 and 1 ton trucks with either the Dana 50 or Dana 60 straight front axle. These were for the trucks with front hub assemblies rather than spindles with individual hub bearings. This axle is 9.39 long from the center of the u-joint out and 1.31 [...]
View Details