This is a genuine Dana/Spicer yoke in a 1350 series universal joint. This fits all domestic versions of the 203 or 205 New Process transfer cases with a bolt on 32 spline output shaft. This yoke uses bolts and straps to hold the u-joint in place.
New Process 203/205 Transfer Case 1350 32 Spline GM Ford Dodge Bolt On
$85.00
- SKU: 3-4-6211-1
- Brand: Dana/Spicer
- Weight: 3.0
- Shipping: Calculated at checkout
Weight | 3.0 lbs |
---|---|
Dimensions | 4 × 4 × 4 in |
Related products
This is a genuine AAM slip yoke with a balancer that fits GM 4X4 1/2 ton trucks and SUV’s with the 246 transfer case and 1344 or 3R series universal joints. This slip yoke is 32 spline.
View DetailsThis is a genuine AAM serrated front differential flanged yoke that fits 2003-2012 Dodge 3/4 and 1 ton trucks with the 9.25 AAM 4X4 front axle assembly. This fits the 9.25 with the 14 bolt cover.
View DetailsThis is a genuine AAM driveshaft flange yoke that fits the rear driveline where it bolts to the rear pinion flange. This is for the 1555 series universal joint. This mates with the 40062272 4 bolt pinion flange.
View DetailsThis is a genuine AAM driveshaft flange yoke that shows to fit 2006+ Dodge Ram 2500 and 3500 series trucks with the 1415 series universal joints. This is the yoke that mates with the 40062272 pinion flange. Please note that the 40055983A casting number is the same on the 1485 series yoke as well.
View DetailsThis is a genuine AAM front driveshaft flange yoke for the 4X4 front driveshaft found in 2003 and newer Dodge Ram 2500 and 3500 series trucks. This yoke is serrated and made to mate with the serrated front pinion yoke.
View DetailsThis is a genuine AAM pinion yoke that fits all GM 7.5/7.6/8.0 rear differentials. These were found in S10’s, Camaro’s, and Trailblazers. This is the later style yoke with the wear sleeve made on it, so you will have to use the 1998+ pinion seal. This is for the 1344 or 3R series u-joint with [...]
View DetailsThis is a genuine AAM male slip yoke for the front of a GM transfer case, such as 246, 261, or 263. This is for the front driveline where it slips into the transfer case. This is for the 3R or 1344 series universal joint.
View DetailsSmall Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View Details