417-862-4455
1 3/8″ input shaft Dodge diesel and V10 NV4500 transmission 5 speed
$59.95
- SKU: 25356D
- Brand: Pro Active
- Weight: 6.0
- Shipping: Calculated at checkout
This input shaft fits the NV4500 Dodge transmissions used behind the diesel or V10 gas engines. This is the larger 1 3/8″ clutch spline found on some aftermarket or factory 6 speed clutches.
| Weight | 6.0 lbs |
|---|---|
| Dimensions | 6 × 4 × 2 in |
Reviews
There are no reviews yet.
| Make | Model | Year |
|---|---|---|
| Dodge Ram | 2500 | 1994 - 1995 |
| Dodge Ram | 2500 | 1996 - 1997 |
| Dodge Ram | 2500 | 1998 - 1999 |
| Dodge Ram | 2500 | 2000 - 2001 |
| Dodge Ram | 2500 | 2002 - 2003 |
| Dodge Ram | 3500 | 1994 - 1995 |
| Dodge Ram | 3500 | 1996 - 1997 |
| Dodge Ram | 3500 | 1998 - 1999 |
| Dodge Ram | 3500 | 2000 - 2001 |
| Dodge Ram | 3500 | 2002 - 2003 |
Related products
Transmission Parts
This first gear fits all NV5600 Dodge diesel 6 speed transmissions. If you have an early (2001 & older) transmission you will have to use the updated lined synchronizer ring. There is a Dodge part number on the box for reference 05019907AA. This is an aftermarket part. We have used the same supplier for over [...]
View Details
Transmission Parts
This mainshaft fits all NV5600 2wd Dodge diesel 6 speed transmission. The box has a Dodge part number 05010049AA for reference. This is an aftermarket part. We have been using the same supplier on these for over 5 years without an issue.
View Details
Transmission Parts
This syncro ring kit fits Ford ZF 5 speeds 1996 and later S5-47. This set has 6 rings.
View Details
This front bearing retainer fits NV4500 Dodge diesel with the aftermarket big 1 3/8″ input shafts. Still uses stock throwout bearing.
View Details
Transmission Parts
Stock replacement input shaft Dodge diesel and V10 NV4500 transmission
This input shaft fits all Dodge diesel or V10 NV4500 5 speed transmissions. It is 1 1/4″ spline diameter and 22 teeth. This replaces part number 18160 and Dodge part number 4882358.
View Details
This bearing and seal kit fits all G56 Dodge diesel 6 speed manual transmissions. It includes all the tapered bearings and races and seals. It does not include any caged needle bearings for underneath the gears on the mainshaft.
View Details
Transmission Parts
NV4500 cluster assembly early up to 1996 Dodge and GM 5:61 ratio
This cluster fits 1992-1996 Dodge and most GM NV4500 transmissions with the 22 tooth input shaft and 5:61 ratio.
View Details
Transmission Parts
Ford ZF 6 Speed Transmission 4X4 Tailhousing ZF650 7.3 S6-650
This 4X4 tailhousing fits Ford 7.3 diesel 6 speed transmissions. This part has a casting number 1319401073. This is for the S6-650 transmission and replaces original part number 1319301022 or casting number 1319401022.
View Details
Be the first to review “1 3/8″ input shaft Dodge diesel and V10 NV4500 transmission 5 speed”
You must be logged in to post a review.