417-862-4455
241DHD Dodge Ram 2500 3500 Transfer Case Chain 1994-2002 BW4470 GM 1990-1996
$140.00
- SKU: HV031
- Brand: Morse Chain
- Weight: 6.6
- Shipping: Calculated at checkout
2 in stock
This is a genuine Morse transfer case chain for the 241DHD transfer case found in many 1994-2002 Dodge Ram 2500 and 3500 series trucks. This transfer case is easily identified by a PTO cover on the side of the front case. This also fits 1990-1996 GM 3500 series trucks with the 4470 Borg Warner transfer case. This case is identified by a 1″ thick plate between the two case halves. This chain is 1 1/2″ wide and has 36 links.
| Weight | 6.6 lbs |
|---|---|
| Dimensions | 14 × 4 × 2 in |
General Inquiries
There are no inquiries yet.
Related products
Transfer Case Parts
This range slider fits all versions of the 231 241 and 261 transfer cases, except 241DHD with the PTO opening on the side of the transfer case. Including GM, Dodge, and Jeep.
View Details
Transfer Case Parts
261 & 263 GM & HD Transfer Case Mainshaft Chevy 1999-2007 1500 2500 6.0
This mainshaft fits all GM 261 and 263 transfer cases except the XHD versions found behind the Allison automatic transmissions or ZF 6 speed manual transmissions in the 3/4 and 1 ton trucks. It comes with an updated snap ring for the synchronizer hub.
View Details
Transfer Case Parts
This is the hub that splines into the sprocket and synchronizer clutch and rides on the mainshaft of the transfer case on a 261 or 263 GM. This one is made to use the seperate synchronizer clutch. Be sure that yours is made like this as some were a 1 piece design with the synchronizer [...]
View Details
Small Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View Details
Transfer Case Parts
This is the outer synchronizer ring for a 261 or 263 GM transfer case. This is the outside ring part of a 3 piece synchronizer pack.
View Details
Transfer Case Parts
1999-2007 Aluminum Rear Case 1/2 fits 149, 246, 261, and 263 GM LD or HD Transfer Chevy 5.3 6.0
This is an aluminum aftermarket rear case that fits all the 149 and 246 GM transfer cases and the 261 and 263 GM LD or HD transfer cases. It is a direct replacement for the factory case 1/2, and is much harder than the factory part. This case eliminates the problem of the oil pump [...]
View Details
Transfer Case Parts
This transfer case sprocket is used in both Ford and Dodge 271 and 273 units. Both sprockets are the same in these units.
View Details
Transfer Case Parts
Aluminum Rear Case 1/2 fits GM 261XHD and 263XHD Transfer Cases 1999-2007 Chevy
This is an aluminum transfer case rear case 1/2 that fits 261XHD and 263XHD transfer cases found in Chevrolet and GMC trucks with either the 8.1 gas engine or Duramax diesel engine and Allison automatic or ZF standard transmissions. This case eliminates the problem with the oil pump wearing through the case. It does not [...]
View Details