417-862-4455
NP208 GM Chevy Transfer Case Input Shaft 32 Spline TH400 65 Muncie 1981-1987 New Process 208
$99.95
- SKU: 15112
- Brand: New Process
- Weight: 4.0
- Shipping: Calculated at checkout
2 in stock
This is an aftermarket 32 spline input shaft for a New Process 208 transfer case in a GM truck. These were used from 1981-1987, and were used behind TH400 automatic or 465 Muncie 4 speed transmissions.
| Weight | 4.0 lbs |
|---|---|
| Dimensions | 6 × 4 × 4 in |
General Inquiries
There are no inquiries yet.
Related products
Transfer Case Parts
This sprocket fits both 261XHD and 263XHD GM transfer cases. These are used with the HV074 chain. 2 are required per unit.
View Details
Transfer Case Parts
This transfer case sprocket is used in both Ford and Dodge 271 and 273 units. Both sprockets are the same in these units.
View Details
Transfer Case Parts
1999-2007 Chevy 261 & 263 GM Transfer Case Middle Synchronizer Ring Fiber Lined Syncro Mode
This is the middle synchronizer ring for a 261 or 263 GM transfer case. It is 1 of 3 parts that make up the synchronizer pack.
View Details
Transfer Case Parts
This is the hub that splines into the sprocket and synchronizer clutch and rides on the mainshaft of the transfer case on a 261 or 263 GM. This one is made to use the seperate synchronizer clutch. Be sure that yours is made like this as some were a 1 piece design with the synchronizer [...]
View Details
Transfer Case Parts
261 & 263 GM & HD Transfer Case Mainshaft Chevy 1999-2007 1500 2500 6.0
This mainshaft fits all GM 261 and 263 transfer cases except the XHD versions found behind the Allison automatic transmissions or ZF 6 speed manual transmissions in the 3/4 and 1 ton trucks. It comes with an updated snap ring for the synchronizer hub.
View Details
Transfer Case Parts
This range hub fits all 241DHD transfer cases with the PTO opening on the side of the transmission. This is used with 17520 snap ring and 17522 range collar.
View Details
Small Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View Details
Transfer Case Parts
10 spline coupler for early GM 205 transfer case to 4 speed standard transmission 4 1/4″ long.
10 spline female coupler for early HM 205 transfer cases used behind 4 speed manual transmission.
View Details