This is the inner most ring for a 261 or 263 GM transfer case. It is part of a 3 piece synchronizer pack.
261 & 263 GM transfer case inner synchronizer ring
$29.99
- SKU: 27722
- Brand: New Venture
- Weight: .40
- Shipping: Calculated at checkout
Weight | .40 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “261 & 263 GM transfer case inner synchronizer ring”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
GM/Chevy | 1500 | 1999 - 2000 |
GM/Chevy | 1500 | 2001 - 2002 |
GM/Chevy | 1500 | 2003 - 2004 |
GM/Chevy | 1500 | 2005 - 2006 |
GM/Chevy | 1500 | 2007 |
GM/Chevy | 2500 | 1999 - 2000 |
GM/Chevy | 2500 | 2001 - 2002 |
GM/Chevy | 2500 | 2003 - 2004 |
GM/Chevy | 2500 | 2005 - 2006 |
GM/Chevy | 2500 | 2007 |
GM/Chevy | 3500 | 1999 - 2000 |
GM/Chevy | 3500 | 2001 - 2002 |
GM/Chevy | 3500 | 2003 - 2004 |
GM/Chevy | 3500 | 2005 - 2006 |
GM/Chevy | 3500 | 2007 |
Related products
Transfer Case Parts
This aluminum mode fork fits all GM 261 and 263 transfer cases. This fork has built in fork pads and is ready to install.
View DetailsSmall Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View DetailsTransfer Case Parts
This is the hub that splines into the sprocket and synchronizer clutch and rides on the mainshaft of the transfer case on a 261 or 263 GM. This one is made to use the seperate synchronizer clutch. Be sure that yours is made like this as some were a 1 piece design with the synchronizer [...]
View DetailsThis bearing and seal kit fits all 261 & 263 GM transfer cases from 1999-2007, except the XHD versions found behind the 8.1 or Duramax engines. They are very complete including all the seals and bearings as well as input/planetary thrust washers and fork inserts for the 263 and a transfer case mounting gasket.
View DetailsTransfer Case Parts
Snap Ring 241DHD Transfer Case Range hub/collar Dodge 241 DHD
This snap ring fits the 241DHD transfer case range hub/collar. These were only used in the transfer cases with the PTO opening on the side.
View DetailsTransfer Case Parts
This transfer case sprocket is used in both Ford and Dodge 271 and 273 units. Both sprockets are the same in these units.
View DetailsTransfer Case Parts
This range fork fits all versions of the 263 GM transfer case including 263XHD. This is the updated fork for use with the 43681 range slider with the wider groove for the shift fork. If your transfer case is 2002 or older you may have to update the slider as well. This fork does not [...]
View DetailsTransfer Case Parts
10 spline coupler for early GM 205 transfer case to 4 speed standard transmission 4 1/4″ long.
10 spline female coupler for early HM 205 transfer cases used behind 4 speed manual transmission.
View Details
Reviews
There are no reviews yet.