417-862-4455
32 Spline GM Chevy Transfer Case Slip Yoke 1330 Series Universal Joint
$225.00
- SKU: 2-3-10791X
- Brand: Dana/Spicer
- Weight: 4.0
- Shipping: Calculated at checkout
1 in stock
This is a genuine Dana/Spicer slip yoke for use with GM transfer cases including 241, 243, 246, 261 and 263 (except XHD versions). These were used in late 1990’s and early 2000’s model trucks. Please be sure of your universal joint size before ordering.
| Weight | 4.0 lbs |
|---|---|
| Dimensions | 6 × 4 × 2 in |
General Inquiries
There are no inquiries yet.
Related products
This is a genuine AAM male slip yoke for the front of a GM transfer case, such as 246, 261, or 263. This is for the front driveline where it slips into the transfer case. This is for the 3R or 1344 series universal joint.
View Details
This is a genuine Dana pinion yoke for a 1410 series u-joint that fits Dana 80 rear differentials. This will fit GM, Ford, and Dodge applications. This yoke is the same as the more expensive 3-4-11081-1X. It just has a little different dust shield on it. This one actually has more seal clearance.
View Details
This is a genuine AAM driveshaft flange yoke that shows to fit 2003+ Dodge Ram trucks with the 1485 series universal joints. This is the yoke that mates with the 40062272 pinion flange. Please be aware that the 40055983A casting number is the same on both the 1415 and 1485 series yokes.
View Details
Yokes
GM 8.6 Pinion Yoke 8.6 10 Bolt Rear Differential 1999+ 3R Series U-Joint Inside Snap Rings Chevy
This is a genuine AAM pinion yoke that fits the GM 10 bolt rear differential with the 8.6″ ring gear found in Chevy trucks from 1999+. This is for the 3R series u-joint with inside snap rings. This is the late style yoke with the factory wear sleeve on it. This can be used in [...]
View Details
Miscellaneous
GM 14 Bolt 10.5/11.5 Rear End Pinion Yoke Differential Full Float 1410 1415 Series U-Joint
This is an aftermarket Powertrain Industries pinion yoke for a 14 bolt with the 10.5″ or 11.5″ ring gear in a GM truck. This is the late style yoke with the sleeve on the seal surface. Can be used on all year trucks from 1973-current as long as you use the late pinion seal (26064030) [...]
View Details
Small Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View Details
This is a genuine AAM pinion yoke with the balancer for the GM 3/4 and 1 ton trucks with the 11.5 rear differential 1999 and newer. This is for the 1480 or 1485 series u-joint. Can also be used on the 14 bolt 10.5 rear differentials.
View Details
This is a genuine Dana/Spicer u-joint bolt and strap kit for the GM cars and trucks with the 3R or 1344 Saginaw series pinion yoke. The Saginaw uses inside snap rings to keep the u-joint centered in the yoke. Kit includes 2 straps and 4 bolts.
View Details