This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
Dana 80 1410 Pinion Yoke Chevy Ford Dodge
$135.00
- SKU: 3-4-11081-1X
- Brand: Dana/Spicer
- Weight: 5.0
- Shipping: Calculated at checkout
Weight | 5.0 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Dana 80 1410 Pinion Yoke Chevy Ford Dodge”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Dodge Ram | 2500 | 1994 - 1995 |
Dodge Ram | 2500 | 1996 - 1997 |
Dodge Ram | 2500 | 1998 - 1999 |
Dodge Ram | 2500 | 2000 - 2001 |
Dodge Ram | 2500 | 2002 |
Dodge Ram | 3500 | 1994 - 1995 |
Dodge Ram | 3500 | 1996 - 1997 |
Dodge Ram | 3500 | 1998 - 1999 |
Dodge Ram | 3500 | 2000 - 2001 |
Dodge Ram | 3500 | 2002 |
Ford | F350 | 1994 - 1995 |
Ford | F350 | 1996 - 1997 |
Ford | F350 | 1998 - 1999 |
Ford | F350 | 2000 - 2001 |
Ford | F350 | 2002 - 2003 |
Ford | F350 | 2004 - 2005 |
Ford | F350 | 2006 - 2007 |
Ford | F350 | 2008 - 2009 |
Ford | F350 | 2010 |
Related products
Small Parts & Seals
Ford Dana 50 & 60 Front Axle Tube Seals 1998.5 Up 4X4 Straight F250 F350 Super Duty
These Ford axle tube seals show to fit 1998.5 and up F250 & F350 with either the Dana 50 or Dana 60 straight front axle. These are the style seal that spin inside themselves. The new part number for these seals is 2019816.
View DetailsSmall Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
This is the outer axle nut washer that goes with the 46085 axle nut on 4X4 Dodge front axles, this fits Dana 44 and 60 as well as the AAM 9.25 front axle found in 2003 and newer Dodge Ram 2500 and 3500 series trucks.
View DetailsSmall Parts & Seals
GM 10 12 Bolt 8.5/8.6 Ford 8.8 Rear Axle C-Clip 8.875 Chevrolet Car Truck
This is a genuine AAM c-clip for the GM 8.5/8.6 10 bolt and 8.875 12 bolt also Ford 8.8 rear axles. These are copper colored steel c-clips. 2 required per vehicle.
View DetailsSmall Parts & Seals
GM 9.5 Rear Pinion Yoke Seal 1998+ AAM 3/4 ton Truck Dodge 4X4 Front 2500 3500 9.25 Front 2003+
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and SUV’s with either the 9.5 rear end. This is for the yoke with the factory wear sleeve on it. This also fits Dodge 3/4 and 1 ton 4X4 trucks 2003 and newer with the AAM 9.25 front axle. These [...]
View DetailsSmall Parts & Seals
Ford Straight 4X4 Front Axle Tube Dust Seal 2006+ Dana 50 & 60 F250 F350
This genuine Dana axle tube dust seal fits 2006 and newer Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FES 5M-15197 and 53877. These are approx. 3.450″ outside diameter, which is larger than the earlier ones. This seal goes on the axle itself right behind the u-joint at [...]
View DetailsThis is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View DetailsSmall Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket.
View Details
Reviews
There are no reviews yet.