417-862-4455
AAM OEM GM 9.25 IFS Axle Shaft LH 4WD 2007-2013 Chevy 4X4 Front 1 ton 2500 3500
$75.00
- SKU: 40057071
- Brand: AAM American Axle Manufacturing
- Weight: 4.0
- Shipping: Calculated at checkout
Out of stock
This is a genuine AAM new left side axle flange for the GM 9.25IFS found in 2007-2013 Chevy and GMC 2500 and 3500 series 4X4 trucks, These are the later style (2007+). The difference is the location of the expander ring. This one is further down the axle. Anyone who has tried to get theirs out to replace the seal knows they can be impossible to get out as the retaining ring sometimes hangs up in the axle gear. We have had to cut these off and disassemble the center section to get them apart. These can be used in 1998-2006 trucks if you replace the axle gears with the 2007 and newer or cut the groove in the axle .125″ deeper.
| Weight | 4.0 lbs |
|---|---|
| Dimensions | 6 × 4 × 2 in |
Be the first to review “AAM OEM GM 9.25 IFS Axle Shaft LH 4WD 2007-2013 Chevy 4X4 Front 1 ton 2500 3500”
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| GM/Chevy | 2500 | 2007 - 2008 |
| GM/Chevy | 2500 | 2009 - 2010 |
| GM/Chevy | 2500 | 2011 - 2012 |
| GM/Chevy | 2500 | 2013 |
| GM/Chevy | 3500 | 2007 - 2008 |
| GM/Chevy | 3500 | 2009 - 2010 |
| GM/Chevy | 3500 | 2011 - 2012 |
| GM/Chevy | 3500 | 2013 |
Related products
Axles & Axle Bearings
AAM 1992-2000 GM 8.5 8 1/2″ 10 Bolt Rear Axle Shaft 2wd 2 Wheel Drive 30 Spline 5 lug
This is a genuine AAM rear axle shaft that fits 2 wheel drive GM 1/2 ton trucks Suburban and Tahoe with the 8.5 rear differential 1992-2000 with rear drum brakes. This axle is 31 13/16″ long and 5 lug and 30 splines. This is a GM part number. The last digits of the part number [...]
View Details
Axles & Axle Bearings
This is a genuine Dana right hand inner axle for the disconnect side of a Dodge 3/4 or 1 ton truck. This is the one that runs from the differential to the discconnect on the passenger side front axle. this fits trucks from 2000-2002. This one has larger splines where the slide collar splines on [...]
View Details
Axles & Axle Bearings
This genuine Dana front outer stub axle fits Dodge 1/2 ton trucks from 1994-2001 with the Dana 44 front axle. this axle is 6.77 long from the center of the u-joint to the tip of the splines and is 1.41 33 spline. If you are not sure of this part number you can call or [...]
View Details
Axles & Axle Bearings
1992-2005 Chevy GMC S10 S15 Axle Bearing & Seal Kit 7.5/7.6 GM7.5 GM7.6
This ia a genuine AAM axle bearing kit for the 7.5 and 7.6 rear axles found in 1992-2005 Chevy S10’s and Blazers also GMC S15’s. This kit includes all parts necessary to replace the axle bearings and seals on both sides. The common part numbers for the bearings is 5707 and the seals are 8660S. [...]
View Details
Axles & Axle Bearings
AAM 1999+ GM 9.5 9 1/2″ 14 Bolt Rear Axle Shaft 2 Wheel Drive 2wd or 4wd 33 Spline 8 Lug Disc Brakes
This is a genuine AAM rear axle shaft that fits some 2 or 4 wheel drive GM 3/4 ton trucks with the 9.5 rear differential 1999-2004 with rear disc brakes. This axle is 33 5/16″ long and 8 lug and 33 splines. Please check length or part number before ordering as there are several divverent [...]
View Details
Axles & Axle Bearings
This is a genuine AAM wheel end kit that includes everything necessary to replace rear hub nearings and seals on 2011+ GM 1 ton trucks with the 11.5 diameter ring gear and dual rear wheels. These kits are great because of all the small parts that are included.
View Details
Axles & Axle Bearings
Ford Dana 50 & 60 Front 4X4 Outer Stub Axle 1998-2004 4X4 F250 F350 Excursion
This genuine Dana outer stub axle fits 1998-2004 Ford 3/4 and 1 ton trucks with either the Dana 50 or Dana 60 straight front axle. These were for the trucks with front hub assemblies rather than spindles with individual hub bearings. This axle is 9.39 long from the center of the u-joint out and 1.31 [...]
View Details
Axles & Axle Bearings
GM 10.5/11.5 Single Rear Wheel Hub Bearing Kit 2001-2010 Chevrolet 2500 3500 AAM Axle
This is a genuine AAM rear axle hub bearing kit that will do both sides on a 2001-2010 GM 3/4 or 1 ton truck with either the 10.5 or 11.5 rear axle and single rear wheels. These kits are great because they have everything that you could possibly need to do the job.
View Details
Reviews
There are no reviews yet.