This is a genuine AAM rear axle seal for the 2010+ Chevy Camaro’s with the 7.6 IRS differential, also refered to as 195mm. These were usually found in the Camaro’s with the V6 engine.
AAM Rear Axle Seal 2010+ Camaro 7.6 IRS Chevy GM 195MM 195 MM ZETA
$10.75
- SKU: 40047374
- Brand: AAM American Axle Manufacturing
- Weight: .40
- Shipping: Calculated at checkout
Weight | .40 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “AAM Rear Axle Seal 2010+ Camaro 7.6 IRS Chevy GM 195MM 195 MM ZETA”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
GM/Chevy | Camaro | 2010 - 2011 |
GM/Chevy | Camaro | 2012 - 2013 |
GM/Chevy | Camaro | 2014 |
Related products
Small Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 1998.5-2005 Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 1998.5-2005 Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked FRESHEDA 5H-15052 A085824 RDS 81. This seal measures approx. 4.46″ outside diameter
View DetailsSmall Parts & Seals
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 3/4 and 1 ton trucks with either a 10.5 or 11.5 ring gear. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used [...]
View DetailsSmall Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View DetailsSmall Parts & Seals
This is a genuine AAM crush sleeve for the 11.5 rear differential found in GM and Dodge 3/4 & 1 ton trucks.
View DetailsThis is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. This nut also fits the 10.5 Dodge rear differential. We use a 1 7/16″ 12 point socket on these, but it may [...]
View DetailsSmall Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
This is a genuine rear wheel hub seal for 2011 and newer GM 3/4 and 1 ton trucks with either the 10.5 or 11.5 rear axle and single or dual rear wheels. This part number is actually on the seal itself.
View Details
Reviews
There are no reviews yet.