This genuine Dana axle tube dust seal fits 2006 and newer Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FES 5M-15197 and 53877. These are approx. 3.450″ outside diameter, which is larger than the earlier ones. This seal goes on the axle itself right behind the u-joint at the end of the axle tube.
Ford Straight 4X4 Front Axle Tube Dust Seal 2006+ Dana 50 & 60 F250 F350
$36.00
- SKU: 53877
- Brand: Dana/Spicer
- Weight: .40
- Shipping: Calculated at checkout
4 in stock
| Weight | .40 lbs |
|---|---|
| Dimensions | 6 × 4 × 2 in |
Be the first to review “Ford Straight 4X4 Front Axle Tube Dust Seal 2006+ Dana 50 & 60 F250 F350”
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| Ford | F250 | 2006 - 2007 |
| Ford | F250 | 2008 - 2009 |
| Ford | F250 | 2010 - 2011 |
| Ford | F250 | 2012 - 2013 |
| Ford | F250 | 2014 |
| Ford | F350 | 2006 - 2007 |
| Ford | F350 | 2008 - 2009 |
| Ford | F350 | 2010 - 2011 |
| Ford | F350 | 2012 - 2013 |
| Ford | F350 | 2014 |
General Inquiries
There are no inquiries yet.
Related products
Small Parts & Seals
This is a genuine AAM crush sleeve for the 11.5 rear differential found in GM and Dodge 3/4 & 1 ton trucks.
View DetailsSmall Parts & Seals
This is a genuine AAM pinion nut washer found on GM & Dodge 3/4 and 1 ton trucks. This is to be used with nut part number 40003027.
View DetailsSmall Parts & Seals
GM 7.5/7.6 Rear Axle C-Clip S10 Camaro Chevrolet 10 Bolt 7 1/2″
This is a genuine AAM c-clip for the GM 7.5/7.6 rear axle found in S10’s, Malibu’s, Camaro’s etc. These are copper colored steel. These are for both open and limited slip style carriers. 2 required per vehicle.
View DetailsSmall Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View DetailsSmall Parts & Seals
This is a genuine rear wheel hub seal for 2011 and newer GM 3/4 and 1 ton trucks with either the 10.5 or 11.5 rear axle and single or dual rear wheels. This part number is actually on the seal itself.
View DetailsThis is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View DetailsSmall Parts & Seals
This is a genuine AAM rear pinion seal that fits 1998 to 2014 GM trucks and SUV’s with 8.6 rear end with the 10 bolt cover. This is for the yoke with the factory wear sleeve on it.
View DetailsSmall Parts & Seals
Ford Dana 50 & 60 Front Axle Tube Seals 1998.5 Up 4X4 Straight F250 F350 Super Duty
These Ford axle tube seals show to fit 1998.5 and up F250 & F350 with either the Dana 50 or Dana 60 straight front axle. These are the style seal that spin inside themselves. The new part number for these seals is 2019816.
View Details
417-862-4455


Reviews
There are no reviews yet.