417-862-4455
Borg Warner 4476 Cadillac SRX All Wheel Drive Transfer Case Seal Kit
$27.21
- SKU: K4476
- Brand: Morse Chain
- Weight: 1.0
- Shipping: Calculated at checkout
This is a transfer case seal kit that fits 2004 and newer Cadillac SRX AWD with the 4476 Borg Warner transfer case.
| Weight | 1.0 lbs |
|---|---|
| Dimensions | 6 × 4 × 2 in |
Be the first to review “Borg Warner 4476 Cadillac SRX All Wheel Drive Transfer Case Seal Kit”
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| Cadillac | SRX | 2004 - 2005 |
| Cadillac | SRX | 2006 - 2007 |
| Cadillac | SRX | 2008 - 2009 |
| Cadillac | SRX | 2010 |
General Inquiries
There are no inquiries yet.
Related products
Transfer Case Parts
GM 261 & 263 XHD Transfer Case Mainshaft Chevy Duramax or 8100 261XHD 263XHD 1999-2007
This mainshaft fits the GM 261 and 263 SHD or XHD transfer case found behind the Allison automatic transmissions or ZF 6 speed manual transmissions.
View Details
This bearing and seal kit fits all 261 & 263 GM transfer cases from 1999-2007, except the XHD versions found behind the 8.1 or Duramax engines. They are very complete including all the seals and bearings as well as input/planetary thrust washers and fork inserts for the 263 and a transfer case mounting gasket.
View Details
Transfer Case Parts
This is the outer synchronizer ring for a 261 or 263 GM transfer case. This is the outside ring part of a 3 piece synchronizer pack.
View Details
Transfer Case Parts
1999-2007 Aluminum Rear Case 1/2 fits 149, 246, 261, and 263 GM LD or HD Transfer Chevy 5.3 6.0
This is an aluminum aftermarket rear case that fits all the 149 and 246 GM transfer cases and the 261 and 263 GM LD or HD transfer cases. It is a direct replacement for the factory case 1/2, and is much harder than the factory part. This case eliminates the problem of the oil pump [...]
View Details
Transfer Case Parts
This range fork fits all 271 Dodge transfer cases. The casting number is the same as the part number.
View Details
Transfer Case Parts
This aluminum mode fork fits all GM 261 and 263 transfer cases. This fork has built in fork pads and is ready to install.
View Details
Small Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View Details
Transfer Case Parts
This range hub fits all 241DHD transfer cases with the PTO opening on the side of the transmission. This is used with 17520 snap ring and 17522 range collar.
View Details
Reviews
There are no reviews yet.