417-862-4455
Aluminum range fork fits 231-241-242-261 New Process transfer cases Chevy Dodge Jeep
$22.50
- SKU: 17833
- Brand: New Venture
- Weight: 1.0
- Shipping: Calculated at checkout
This aluminum range shift fork fits many transfer case applications including 231’s 241’s 242’s and 261,s. This parts number is cast on most factory forks and replaces the earlier fork cast 16976.
| Weight | 1.0 lbs |
|---|---|
| Dimensions | 6 × 4 × 2 in |
Reviews
There are no reviews yet.
| Make | Model | Year |
|---|---|---|
| GM/Chevy | 1500 | 1990 - 1991 |
| GM/Chevy | 1500 | 1992 - 1993 |
| GM/Chevy | 1500 | 1994 - 1995 |
| GM/Chevy | 1500 | 1996 - 1997 |
| GM/Chevy | 1500 | 1998 - 1999 |
| GM/Chevy | 1500 | 2000 - 2001 |
| GM/Chevy | 1500 | 2002 - 2003 |
| GM/Chevy | 1500 | 2004 - 2005 |
| GM/Chevy | 1500 | 2006 - 2007 |
| GM/Chevy | 2500 | 1990 - 1991 |
| GM/Chevy | 2500 | 1992 - 1993 |
| GM/Chevy | 2500 | 1994 - 1995 |
| GM/Chevy | 2500 | 1996 - 1997 |
| GM/Chevy | 2500 | 1998 - 1999 |
| GM/Chevy | 2500 | 2000 - 2001 |
| GM/Chevy | 2500 | 2002 - 2003 |
| GM/Chevy | 2500 | 2004 - 2005 |
| GM/Chevy | 3500 | 1990 - 1991 |
| GM/Chevy | 3500 | 1992 - 1993 |
| GM/Chevy | 3500 | 1994 - 1995 |
| GM/Chevy | 3500 | 1996 - 1997 |
| GM/Chevy | 3500 | 1998 - 1999 |
| GM/Chevy | 3500 | 2000 - 2001 |
| GM/Chevy | 3500 | 2002 - 2003 |
| GM/Chevy | 3500 | 2004 - 2005 |
| GM/Chevy | 3500 | 2006 - 2007 |
Related products
Transfer Case Parts
29 Spline Input Shaft 241DHD/241DLD Transfer Case Dodge 241 Wide Bearing
This 29 spline input shaft fits all 241 Dodge transfer cases including 241DLD and 241DHD with the fine tooth planetaries (1995 and newer). It is set up for the wide (BD50-8 or N5210KLB) bearing. We also have a 29 spline input for 241DHD only with the narrow input bearing (110L or 6010N) if you prefer. [...]
View Details
Transfer Case Parts
This is the outer synchronizer ring for a 261 or 263 GM transfer case. This is the outside ring part of a 3 piece synchronizer pack.
View Details
Transfer Case Parts
Aluminum Rear Case 1/2 fits GM 261XHD and 263XHD Transfer Cases 1999-2007 Chevy
This is an aluminum transfer case rear case 1/2 that fits 261XHD and 263XHD transfer cases found in Chevrolet and GMC trucks with either the 8.1 gas engine or Duramax diesel engine and Allison automatic or ZF standard transmissions. This case eliminates the problem with the oil pump wearing through the case. It does not [...]
View Details
Transfer Case Parts
This range hub fits all 241DHD transfer cases with the PTO opening on the side of the transmission. This is used with 17520 snap ring and 17522 range collar.
View Details
This bearing and seal kit fits 261XHD and 263XHD transfer cases in 3/4 and 1 ton GM trucks with the 8.1 gas or Duramax diesel engines. It is a very complete kit including all the bearings and seals as well as thrust washers for the input/planetary, fork inserts for the 263XHD range fork, and even [...]
View Details
Transfer Case Parts
This range fork fits all 271 Dodge transfer cases. The casting number is the same as the part number.
View Details
Transfer Case Parts
1999-2007 Aluminum Rear Case 1/2 fits 149, 246, 261, and 263 GM LD or HD Transfer Chevy 5.3 6.0
This is an aluminum aftermarket rear case that fits all the 149 and 246 GM transfer cases and the 261 and 263 GM LD or HD transfer cases. It is a direct replacement for the factory case 1/2, and is much harder than the factory part. This case eliminates the problem of the oil pump [...]
View Details
Transfer Case Parts
We just got some new planetary assemblies for the Borg Warner transfer cases found in the mid to late 1990’s GM 3/4 and 1 ton trucks. These fit 1370-4401-4470 transfer cases. These are 32 female spline where they slide onto the transmission.
View Details
Be the first to review “Aluminum range fork fits 231-241-242-261 New Process transfer cases Chevy Dodge Jeep”
You must be logged in to post a review.