417-862-4455
Dana 60 Bare Differential Carrier 4:10 & Faster GM Ford Dodge
$225.00
- SKU: 706040X
- Brand: Dana/Spicer
- Weight: 23.0
- Shipping: Calculated at checkout
1 in stock
This is a genuine Dana/Spicer bare open carrier for 4:10 and faster gear ratio’s (3:73, 3:54, etc.). This fits many common domestic applications, and can be used with 30, 32, or 35 spline axles, and in front or rear axles. This kit includes a set of ring gear bolts, differential shims, roll pin for the cross shaft, and a cover gasket.
| Weight | 23.0 lbs |
|---|---|
| Dimensions | 12 × 12 × 12 in |
General Inquiries
There are no inquiries yet.
Related products
This is a genuine AAM spider gear kit that fits GM cars and trucks with the 7.6 28 spline open differentials. This will not work in a posi trac or limited slip carrier.
View Details
This is a genuine AAM axle gear/internal kit for the Dodge 9.25 front end found in 2007 and newer 3/4 and 1 ton trucks. Please note the smaller pinion gears are rounded where they contact the carrier and use thin thrust washers. From 2003-2006 Dodge used the same internal kit as the GM trucks which [...]
View Details
Cases & Spiders
Ford 9.75 Rear Differential Cross Pin Open and Posi Limited Slip
This is a genuine AAM differential cross pin for the Ford 9.75 rear differential found in 1997 and newer Ford 1/2 truck and SUV’s. This differential has a 12 bolt cover. The AAM part number is F75Z4211AA.
View Details
Cases & Spiders
This is a genuine AAM bare open differential carrier assembly that fit the GM 7.6 or 7 5/8″ rear differential with 28 spline axles and 3:23 or numerically higher (3:42, 3:73, etc.). These were used in early 1990’s and newer S10’s and Camaro’s.
View Details
This is a genuine AAM Axle Gear kit that fits all year GM and Dodge trucks with the 11.5 rear differential. This will only work with a factory open carrier and not a posi or limited slip.
View Details
This is a genuine Dana 35 clutch pack for a Track Lok differential in a Jeep. This kit includes enough clutches to do both sides.
View Details
Cases & Spiders
This is a genuine AAM loaded open differential carrier assembly that fit the GM 7.6 or 7 5/8″ rear differential with 28 spline axles and 3:23 or numerically higher (3:42, 3:73, etc.). These were used in early 1990’s and newer S10’s and Camaro’s.
View Details
This is a genuine AAM spider gear kit that fits GM SUVs trucks with the 8.0 28 spline open differentials. Applications include Colorado, Canyon, and Trailblazers. This will not work in a posi trac or limited slip carrier.
View Details