This is a genuine Dana clutch pack for a Dana 60 Trac Lok differential. This kit includes enough clutches to do both sides.
Dana 60 Trac Lok Differential Clutch Pack Posi Limited Slip
$75.00
- SKU: 701151X
- Brand: Dana/Spicer
- Weight: 4.0
- Shipping: Calculated at checkout
Weight | 4.0 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Dana 60 Trac Lok Differential Clutch Pack Posi Limited Slip”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Ford | F250 | 1997 - 1998 |
Ford | F250 | 1999 - 2000 |
Ford | F250 | 2001 - 2002 |
Ford | F250 | 2003 - 2004 |
Ford | F250 | 2005 - 2006 |
Ford | F250 | 2007 - 2008 |
Ford | F250 | 2009 - 2010 |
Ford | F250 | 2011 - 2012 |
Ford | F250 | 2013 - 2014 |
Related products
This is a genuine AAM spider gear kit for the 10.5 rear differential found in 1999 and newer Ford F250 and F350 trucks. This is for the 3 pinion gear setup and is for the open differential, not for the limited slip differential. For some reason the Y or cross is not included with this [...]
View DetailsThis is a genuine AAM open differental assembly for the 10.5 rear differential found in some 2003+ Dodge Ram trucks.
View DetailsThis is a genuine AAM axle gear/internal kit for the Dodge 9.25 front end found in 2007 and newer 3/4 and 1 ton trucks. Please note the smaller pinion gears are rounded where they contact the carrier and use thin thrust washers. From 2003-2006 Dodge used the same internal kit as the GM trucks which [...]
View DetailsCases & Spiders
Dana 60 61 Trac Lok Differential Clutch Pack Posi Limited Slip
This is a genuine Dana clutch pack for a Dana 60 or 61 Trac Lok differential. This kit includes enough clutches to do both sides.
View DetailsThis is a genuine AAM differential carrier for the 9.25 front axle found in 2007 and newer Dodge Ram 3/4 and 1 ton trucks. This one is made for the spider gears that are concave on the outside as opposed to the flat ones found in 2003-2006.
View DetailsThis is a genuine AAM internal kit for 2003 and newer Dodge Ram 2500 trucks with the 10.5 ring gear and open carrier. These will not work in a posi or limited slip differential.
View DetailsCases & Spiders
This is a genuine AAM bare open differential carrier assembly that fit the GM 7.6 or 7 5/8″ rear differential with 28 spline axles and 3:23 or numerically higher (3:42, 3:73, etc.). These were used in early 1990’s and newer S10’s and Camaro’s.
View DetailsCases & Spiders
This is a genuine AAM loaded open differential carrier assembly that fit the GM 7.6 or 7 5/8″ rear differential with 28 spline axles and 3:23 or numerically higher (3:42, 3:73, etc.). These were used in early 1990’s and newer S10’s and Camaro’s.
View Details
Reviews
There are no reviews yet.