417-862-4455
Dana 35 44 60 Disconnect Jeep Dodge 4X4 Front Axle Shift Fork Pad
$0.95
- SKU: 621059
- Brand: Dana/Spicer
- Weight: .10
- Shipping: Calculated at checkout
This is a genuine Dana/Spicer shift fork pad for the Dana 35, 44, and 60 4X4 front axles with a disconnect. These were used in Jeep and Dodge applications. Price is each, two are required per fork.
| Weight | .10 lbs |
|---|---|
| Dimensions | 4 × 4 × 1 in |
General Inquiries
There are no inquiries yet.
Related products
Small Parts & Seals
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 3/4 and 1 ton trucks with either a 10.5 or 11.5 ring gear. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used [...]
View Details
Small Parts & Seals
GM 8.6 Pinion Yoke Sleeve Seal 1999+ Chevrolet 10 Bolt 1/2 Ton 3/4 GM9.5 14 Bolt Trucks & SUVs
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 1/2 ton trucks also some 1998 model Suburban and Tahoe. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used the earlier National [...]
View Details
Small Parts & Seals
GM 9.5 Rear Pinion Yoke Seal 1998+ AAM 3/4 ton Truck Dodge 4X4 Front 2500 3500 9.25 Front 2003+
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and SUV’s with either the 9.5 rear end. This is for the yoke with the factory wear sleeve on it. This also fits Dodge 3/4 and 1 ton 4X4 trucks 2003 and newer with the AAM 9.25 front axle. These [...]
View Details
Small Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View Details
Small Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 2006+ Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 2006 and newer Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked SKF 2017426 DANA. This seal measures approx. 5.48″ outside diameter. The original part number was 2017426.
View Details
Small Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket. The newest Dana part number for this yoke is 2001855.
View Details
Small Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 1998.5-2005 Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 1998.5-2005 Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked FRESHEDA 5H-15052 A085824 RDS 81. This seal measures approx. 4.46″ outside diameter
View Details
This is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View Details