417-862-4455
GM 7.6 and 8.0 Rear Pinion Yoke Seal 1998+ AAM 7.25 S10 Camaro
$7.98
- SKU: 40006689
- Brand: AAM American Axle Manufacturing
- Weight: .40
- Shipping: Calculated at checkout
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and SUV’s with either the 7.6 or 8.0 rear end. This is for the yoke with the factory wear sleeve on it. This also fits the later 7.25IFS with the wear sleeve on the yoke.
| Weight | .40 lbs |
|---|---|
| Dimensions | 6 × 4 × 2 in |
Be the first to review “GM 7.6 and 8.0 Rear Pinion Yoke Seal 1998+ AAM 7.25 S10 Camaro”
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| GM/Chevy | S10 | 1998 - 1999 |
| GM/Chevy | S10 | 2000 - 2001 |
| GM/Chevy | S10 | 2002 - 2003 |
| GM/Chevy | S10 | 2004 - 2005 |
| GM/Chevy | S10 | 2006 - 2007 |
| GM/Chevy | S10 | 2008 - 2009 |
| GM/Chevy | S10 | 2010 - 2011 |
| GM/Chevy | S10 | 2012 |
| GM/Chevy | S10 Trailblazer | 1998 - 1999 |
| GM/Chevy | S10 Trailblazer | 2000 - 2001 |
| GM/Chevy | S10 Trailblazer | 2002 - 2003 |
| GM/Chevy | S10 Trailblazer | 2004 - 2005 |
| GM/Chevy | S10 Trailblazer | 2006 - 2007 |
| GM/Chevy | S10 Trailblazer | 2008 - 2009 |
| GM/Chevy | S10 Trailblazer | 2010 - 2011 |
| GM/Chevy | S10 Trailblazer | 2012 |
General Inquiries
There are no inquiries yet.
Related products
Small Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View Details
Small Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View Details
Small Parts & Seals
This is the outer axle nut washer that goes with the 46085 axle nut on 4X4 Dodge front axles, this fits Dana 44 and 60 as well as the AAM 9.25 front axle found in 2003 and newer Dodge Ram 2500 and 3500 series trucks.
View Details
This is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View Details
Small Parts & Seals
GM 10 12 Bolt 8.5/8.6 Ford 8.8 Rear Axle C-Clip 8.875 Chevrolet Car Truck
This is a genuine AAM c-clip for the GM 8.5/8.6 10 bolt and 8.875 12 bolt also Ford 8.8 rear axles. These are copper colored steel c-clips. 2 required per vehicle.
View Details
Small Parts & Seals
These axle tube seals fit 2003+ Dodge Ram 2500/3500 series 4X4 front ends with the 9.25 front axle. This is an AAM part. These are sold individually. The newest AAM part number for this seal is 40201742. Same as Yukon part number YMSC1007.
View Details
Small Parts & Seals
This is a genuine AAM crush sleeve for the 11.5 rear differential found in GM and Dodge 3/4 & 1 ton trucks.
View Details
Miscellaneous
1998-2007 Front Axle Disconnect Kit AAM GM 8.25IFS GM 8.25 IFS Chevrolet 1/2 Ton Suburban Tahoe
This is a genuine AAM front axle disconnect kit for the GM 8.25IFS found in 1998-2007 1/2 ton trucks and SUVs. This is a really nice kit with all necessary parts and pieces.
View Details
Reviews
There are no reviews yet.