This is a genuine Dana/Spicer rubber differential fill plug. These were used in Jeep and Dodge applications including Dana 35 and 44 and Dodge 8.25 and 9.25. The original Dana part number was 41356.
Dana 35 44 Jeep Rubber Differential Cover Fill Plug Dodge 8.25 9.25 Rear
$5.25
- SKU: 51489
- Brand: Dana/Spicer
- Weight: .25
- Shipping: Calculated at checkout
| Weight | .25 lbs |
|---|---|
| Dimensions | 2 × 2 × 2 in |
Be the first to review “Dana 35 44 Jeep Rubber Differential Cover Fill Plug Dodge 8.25 9.25 Rear”
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| Dodge Ram | 1500 | 1976 - 1977 |
| Dodge Ram | 1500 | 1978 - 1979 |
| Dodge Ram | 1500 | 1980 - 1981 |
| Dodge Ram | 1500 | 1982 - 1983 |
| Dodge Ram | 1500 | 1984 - 1985 |
| Dodge Ram | 1500 | 1986 - 1987 |
| Dodge Ram | 1500 | 1988 - 1989 |
| Dodge Ram | 1500 | 1990 - 1991 |
| Dodge Ram | 1500 | 1992 - 1993 |
| Dodge Ram | 1500 | 1994 - 1995 |
| Dodge Ram | 1500 | 1996 - 1997 |
| Dodge Ram | 1500 | 1998 - 1999 |
| Dodge Ram | 1500 | 2000 - 2001 |
| Dodge Ram | 1500 | 2002 - 2003 |
| Dodge Ram | 1500 | 2004 |
| Jeep | Wrangler | 1985 - 1986 |
| Jeep | Wrangler | 1987 - 1988 |
| Jeep | Wrangler | 1989 - 1990 |
| Jeep | Wrangler | 1991 - 1992 |
| Jeep | Wrangler | 1993 - 1994 |
| Jeep | Wrangler | 1995 - 1996 |
| Jeep | Wrangler | 1997 - 1998 |
| Jeep | Wrangler | 1999 - 2000 |
| Jeep | Wrangler | 2001 - 2002 |
| Jeep | Wrangler | 2003 - 2004 |
| Jeep | Wrangler | 2005 |
General Inquiries
There are no inquiries yet.
Related products
Small Parts & Seals
This is a genuine AAM pinion nut washer found on GM & Dodge 3/4 and 1 ton trucks. This is to be used with nut part number 40003027.
View DetailsSmall Parts & Seals
Ford Straight 4X4 Front Axle Tube Dust Seal 2006+ Dana 50 & 60 F250 F350
This genuine Dana axle tube dust seal fits 2006 and newer Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FES 5M-15197 and 53877. These are approx. 3.450″ outside diameter, which is larger than the earlier ones. This seal goes on the axle itself right behind the u-joint at [...]
View DetailsSmall Parts & Seals
GM 10 12 Bolt 8.5/8.6 Ford 8.8 Rear Axle C-Clip 8.875 Chevrolet Car Truck
This is a genuine AAM c-clip for the GM 8.5/8.6 10 bolt and 8.875 12 bolt also Ford 8.8 rear axles. These are copper colored steel c-clips. 2 required per vehicle.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 1998.5-2005 Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 1998.5-2005 Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked FRESHEDA 5H-15052 A085824 RDS 81. This seal measures approx. 4.46″ outside diameter
View DetailsThis is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View DetailsSmall Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket. The newest Dana part number for this yoke is 2001855.
View DetailsSmall Parts & Seals
GM 7.6 and 8.0 Rear Pinion Yoke Seal 1998+ AAM 7.25 S10 Camaro
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and SUV’s with either the 7.6 or 8.0 rear end. This is for the yoke with the factory wear sleeve on it. This also fits the later 7.25IFS with the wear sleeve on the yoke.
View DetailsSmall Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View Details
417-862-4455




Reviews
There are no reviews yet.