417-862-4455
Dana 35 Ford Explorer 4X4 Front Axle Seal Left Driver’s Side 1995-2001 IFS
$17.45
- SKU: 46065
- Brand: Dana/Spicer
- Weight: .30
- Shipping: Calculated at checkout
This is a genuine Dana/Spicer axle seal for the left or driver’s side on a Dana 35 IFS 4X4 front axle in 1995-2001 Ford Explorer’s. The National number for this seal is 710429. The right side was part number 46066, but is no longer available from Dana. The National part number for the right side is 710428.
| Weight | .30 lbs |
|---|---|
| Dimensions | 3 × 3 × 1 in |
Related products
Axles & Axle Bearings
AAM 9.25 Dodge Ram RH Right Front Inner Axle Shaft 4X4 2003-2009
This is a genuine AAM right hand inner axle shaft for the front of a Dodge Ram 3/4 or 1 ton truck from 2003-2009. This axle is 38″ long from the center of the u-joint to the tip of the splines. This is set up for the 1485 series u-joint.
View Details
Axles & Axle Bearings
AAM Rear Axle Shaft 2 or 4 Wheel Drive 1999-2007 GM Chevy 1/2 ton Trucks SUV’s 8.6 10 Bolt 6 Lug
This is a genuine AAM rear axle shaft that fits GM 1/2 ton trucks Suburban and Tahoe with the 8.6 rear differential 1999-2005 with rear disc brakes and 2006-2007 with rear disc or drum Brakes. This axle fits 2 and 4 wheel drive applications. This axle is 33 9/16″ long and 6 lug. This axle [...]
View Details
Axles & Axle Bearings
Dodge Dana 60 Front 4X4 Outer Stub Axle 1994 1995 1996 1997 1998 1999
This is a genuine Dana front outer stub axle that fits 3/4 and 1 ton Dodge trucks from 1994-1999. It is 7.05″ long.
View Details
Axles & Axle Bearings
AAM Rear Axle Bearing & Seal kit 1/2 ton Chevy GMC Truck Tahoe Suburban 1990+
This is a genuine AAM axle bearing and seal kit for 1 side that fits 1990 and newer Chevy trucks and SUVs. This kit also includes a new c-clip for the axle. This is the same as bearing number 513067 and seal 4762N at your local parts store. 2 kits are required per vehicle.
View Details
Axles & Axle Bearings
Dana 44 60 Dodge Disconnect Slide Collar Front Differential Axle 4X4 Ram 1500 2500 3500 Jeep
This genuine Dana slide collar fits most Dodge Dana 44 and 60 front disconnect axles up to 1999. 2000+ Dodge Dana 60’s used a larger splined slide collar which is not available from Dana. This also fit’s many Jeep applications with the disconnect front axle.
View Details
Axles & Axle Bearings
This is a genuine Dana right hand inner axle for the disconnect side of a Dodge 3/4 or 1 ton truck. This is the one that runs from the differential to the discconnect on the passenger side front axle. this fits trucks from 2000-2002. This one has larger splines where the slide collar splines on [...]
View Details
Axles & Axle Bearings
AAM 1999+ GM 9.5 9 1/2″ 14 Bolt Rear Axle Shaft 2 Wheel Drive 2wd or 4wd 33 Spline 8 Lug Disc Brakes
This is a genuine AAM rear axle shaft that fits some 2 or 4 wheel drive GM 3/4 ton trucks with the 9.5 rear differential 1999-2004 with rear disc brakes. This axle is 33 5/16″ long and 8 lug and 33 splines. Please check length or part number before ordering as there are several divverent [...]
View Details
Axles & Axle Bearings
These are genuine Dana outer stub axles that show to fit 2000-2002 Dodge 3/4 and 1 ton trucks with the Dana 60 front differentials. These are 1.41 33 spline and 7.39 from the center of the u-joint to the tip of the threads. If you aren’t sure about the part number for you application you [...]
View Details