417-862-4455
Dana 44 1330 Series U-Joint Pinion Yoke Jeep Rubicon TJ Wrangler
$85.00
- SKU: 2-4-3581-1X
- Brand: Dana/Spicer
- Weight: 3.0
- Shipping: Calculated at checkout
1 in stock
This is a genuine Dana/Spicer pinion yoke in a 1330 series, for the Dana 44 rear differential found in Jeep TJ Rubicons up to 2006. Can be used on any early model Dana 44 (pre 2006). This is 3/4″ shorter than the factory yoke, but there is usually enough slip in slip yoke to make up for it.
| Weight | 3.0 lbs |
|---|---|
| Dimensions | 4 × 4 × 4 in |
General Inquiries
There are no inquiries yet.
Related products
This is a genuine AAM serrated front differential flanged yoke that fits 2003-2012 Dodge 3/4 and 1 ton trucks with the 9.25 AAM 4X4 front axle assembly. This fits the 9.25 with the 14 bolt cover. The Dodge part number is 5086696AC.
View Details
Yokes
GM 8.6 Pinion Yoke 8.6 10 Bolt Rear Differential 1999+ 3R Series U-Joint Inside Snap Rings Chevy
This is a genuine AAM pinion yoke that fits the GM 10 bolt rear differential with the 8.6″ ring gear found in Chevy trucks from 1999+. This is for the 3R series u-joint with inside snap rings. This is the late style yoke with the factory wear sleeve on it. This can be used in [...]
View Details
Transfer Case Parts
Dodge Ram 2003+ Slip Yoke 1410/1415 34 Spline w/Balancer 271 273 Transfer Case OEM AAM
This is a genuine AAM 271-273 Transfer Case Slip Yoke w/balancer 1410/1415 U-Joint. These were used on 2003+ Dodge Ram 2500 and 3500 series trucks with the 271 or 273 New Process transfer case. 2.29961″ O.D. 9.39370″ Long 34 Spline 1.74803 Diameter. Please be sure of your u-joint size before ordering as some of these [...]
View Details
Small Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View Details
This is a genuine AAM pinion yoke that shows to fit GM trucks with either the 10.5 or 11.5 rear differential in a 1480/1485 series. These show to be used in 2010 and newer trucks, but can also be used for earlier applications when upgrading to the larger universal joints. This is also with a [...]
View Details
This is a genuine AAM 1410 series rear pinion yoke for the GM 9.5 rear differential. This can also be used on the 8.5/8.6 10 bolt rear differential found in the 1/2 trucks form 1981-current. This is the later style yoke with the wear sleeve on the seal surface so you must use the late [...]
View Details
This is a genuine AAM rear pinion yoke for the GM trucks with the 14 bolt 9.5 differential. These were in the light 3/4 trucks and has c-clips on the axles. These are for the 1350 series u-joint. This is the later style yoke with the sleeve on the seal surface. This can also be [...]
View Details
Miscellaneous
This is a genuine AAM pinion flange yoke for the 10.5 and 11.5 14 bolt rear differential found in 2003+ Dodge 3/4 and 1 ton trucks. This is used with the 26064030 pinion seal. It already has the wear sleeve on the seal surface. This replaces the perfectly square ones found on some early models [...]
View Details