417-862-4455
Dana 44 Trac Lok Differential Jeep JL 2018+ Rear Posi Track Carrier Assembly Case Kit AdvanTEK
$425.00
- SKU: 10136025
- Brand: Dana/Spicer
- Weight: 25.0
- Shipping: Calculated at checkout
Out of stock
This is a genuine Dana/Spicer Trac Lok differential for the Dana 44 rear differential found in some 2018 and newer Jeep JL’s. This kit includes a complete carrier assembly, as well as ring gear bolts, and side differential bearings. Note the side bearings are 2 different sizes. The ring gear side is quite a bit larger than the passenger side. THIS PART HAS BEEN REPLACED BY A 10132530.
| Weight | 25.0 lbs |
|---|---|
| Dimensions | 12 × 12 × 12 in |
General Inquiries
There are no inquiries yet.
Related products
Traction Devices
Dana 80 Trac Lok Posi Differential 4:10 and Down Ford Dodge Carrier Assembly 35 Spline
This is a genuine Dana Trac Lok limited slip differential assembly for Ford and Dodge trucks with the Dana 80 and 35 spline axles. This carrier is for ratio’s 4:10 and down (4:63, 4:88, etc.) although it does work in some Ford trucks that had a factory 3:73 gear ration with a thin ring gear. [...]
View Details
Traction Devices
Dodge 8.25 Trac-Lok Differential Posi Carrier Assembly Complete 27 Spline C8.25 1976-1996
This is a genuine Dana Trac-Loc differential for Dodge vehicles with the 8.25″ ring gear from 1976-1996 with 27 spline axles. This is what came out in these year vehicles from the factory if they had a posi track differential. They also make a nice upgrade when replacing an open differential. The old Dana number [...]
View Details
Traction Devices
Jeep Dana Super 44 Hydra Lok Vari Lok Limited Slip Differential Carrier Assembly 7/16″ Bolt Holes
This is a genuine Dana Hydra Lok or Vari Lok limited slip differential for a Dana 44 in a late model Jeep. This one is drilled for the 7/16″ ring gear bolts. The plenum for this differential is sold seperately under part number 52783. This unit will only work to replace a Hydra Lok or [...]
View Details
This is a genuine Dana/Spicer limited slip differential for Ford GM Dodge applications with 35 spline axles. This is for 4:10 and numerically lower gear ratio’s (3;73, 3;54, etc.). This is a kit that includes differential shims, side bearings and 2 sets of different races, and ring gear bolts. This carrier is machined for an [...]
View Details
Traction Devices
Jeep Dana Super 44 Hydra Lok Vari Lok Limited Slip Differential Carrier Assembly 3/8″ Bolt Holes
This is a genuine Dana Hydra Lok or Vari Lok limited slip differential for a Dana 44 in a late model Jeep. This one is drilled for the 3/8″ ring gear bolts. The plenum for this differential is sold seperatelyunder part number 52783. This unit will only work to replace a Hydra Lok or can be [...]
View Details
Traction Devices
Dana 80 37 Spline Posi Track Differential Ford 4:10 and Down Helical Truetrac GM 3500HD
This is a genuine Dana/Spicer posi track differential. This is the helical or Truetrac style posi that uses worm gears instead of axle and spider gears with clutches. this is for 37 spline axles and is for 4:10 and slower (4:56, 4:63, 4:88 etc.). These were commonly found in F450 trucks from the early 1990’s [...]
View Details
Traction Devices
This is a genuine AAM posi trac differential for 1997 and newer Ford 1/2 ton trucks and SUVs with the 9.75 ring gear. It is the same as the Dana 73106X.
View Details
Traction Devices
This is a genuine AAM Posi Trac differntial for the Ford 10.25 rear end. These have 35 spline axle gears. This can be used as a low cost alternative to the 3 pinion posi found in the 1999 and newer Ford F250’s and F350’s.
View Details