This is a genuine Dana/Spicer bare open differential carrier for 4:10 and faster gear ratios (3:73, 3:54, etc.). This works in most applications with axle gear spline of 30, 32, and 35. This is a narrow carrier that uses outside spacers (included). This also comes with shims, ring gear bolts, and a bolt for the cross pin. If I were stranded on a desert island with only one Dana 60 carrier this would be it!
Dana 60 Bare Open Differential Case Carrier 4:10 and Faster GM Chevy Ford Dodge 30 32 35 Spline Axle
$180.00
- SKU: 707212X
- Brand: Dana/Spicer
- Weight: 22.0
- Shipping: Calculated at checkout
Weight | 22.0 lbs |
---|---|
Dimensions | 12 × 12 × 12 in |
Related products
This is a genuine AAM spider gear kit that fits GM SUVs trucks with the 8.0 28 spline open differentials. Applications include Colorado, Canyon, and Trailblazers. This will not work in a posi trac or limited slip carrier.
View DetailsThis is a genuine Dana clutch pack for a Dana 44 Trac Lok differential or a Dodge with a 9.25 rear posi track differential. The new Dana part number is 708203, but we still use the original part number 706352X.
View DetailsThis is a genuine AAM axle gear/internal kit for the Dodge 9.25 front end found in 2007 and newer 3/4 and 1 ton trucks. Please note the smaller pinion gears are rounded where they contact the carrier and use thin thrust washers. From 2003-2006 Dodge used the same internal kit as the GM trucks which [...]
View DetailsCases & Spiders
This is a genuine AAM bare open differential carrier assembly that fit the GM 7.6 or 7 5/8″ rear differential with 28 spline axles and 3:23 or numerically higher (3:42, 3:73, etc.). These were used in early 1990’s and newer S10’s and Camaro’s.
View DetailsThis is a genuine AAM spider gear kit for the 10.5 rear differential found in 1999 and newer Ford F250 and F350 trucks. This is for the 3 pinion gear setup and is for the open differential, not for the limited slip differential. For some reason the Y or cross is not included with this [...]
View DetailsThis is a genuine AAM differential carrier for the 9.25 front axle found in 2007 and newer Dodge Ram 3/4 and 1 ton trucks. This one is made for the spider gears that are concave on the outside as opposed to the flat ones found in 2003-2006.
View DetailsCases & Spiders
GM & Dodge AAM 11.5 Open Differential Carrier Assembly 1999-2014
This is a new genuine AAM open differential carrier assembly that fits GM trucks 1999-2014 and Dodge Ram trucks 2003-2014. It is complete and ready to install, just press on some new side bearings and bolt on your ring gear. This supersedes part numbers 40101020 and 40000278.
View DetailsCases & Spiders
GM9.25 IFS & 9.5 Rear Differential Bare Carrier Also Dodge 9.25 Front 2003-2006 AAM Axle
This is a genuine AAM open differential carrier for the GM 92.5IFS or 9.5 rear axle, also for the 9.25 straight front axle found in 2003-2006 3/4 and 1 ton Dodge Ram trucks. This is set up for the spider gears that are flat where the contact the carrier.
View Details