417-862-4455
Dana 70 32 Spline Case Kit Dodge Ram D70U Bare Open Differential Carrier Ford Econoline Van
$195.00
- SKU: 708017
- Brand: Dana/Spicer
- Weight: 26.0
- Shipping: Calculated at checkout
This is a genuine Dana/Spicer bare open differential carrier for a Dana 70 rear differential with 32 spline axles. These were common in 1990’s Dodge ram 2500 and 3500 series trucks. Also used in some Ford van applications. This comes with a set of differential side shims, a set of ring gear bolts, and a roll pin for the cross pin. This is for 32 spline axles.
| Weight | 26.0 lbs |
|---|---|
| Dimensions | 12 × 12 × 12 in |
General Inquiries
There are no inquiries yet.
Related products
This is a genuine AAM spider gear kit that fits GM SUVs trucks with the 8.0 28 spline open differentials. Applications include Colorado, Canyon, and Trailblazers. This will not work in a posi trac or limited slip carrier.
View Details
Dana 70/80 Trac-Loc Clutches Dana 70 and Dana 80; Includes Clutches And Steels; Includes Clutches For Both Side Gears Dana Spicer Dana 70/80 Trac-Loc Clutches 702009 Locking Differential Clutch Pack. The new Dana part number is 2003819, but we still stock it under the original part number 702009.
View Details
Dana 60/70 Power-Loc Clutches Dana 60 and Dana 70; Includes Clutches And Steels; Includes Clutches For Both Side Gears Dana Spicer Dana 60/70 Power-Loc Clutches Locking Differential Clutch Pack. The new Dana part number is 2021288, but we still stock it under the original part number 707075X.
View Details
This is a genuine AAM open differental assembly for the 10.5 rear differential found in some 2003+ Dodge Ram trucks.
View Details
Cases & Spiders
Ford 8.8 31 spline Traclock Posi Traction Differential OEM AAM Spider Gear Kit Axle F150 Explorer
This is a genuine AAM spider gear kit for the factory Ford 8.8 31 spline posi trac differential. Include everything, except the clutches. This kit has the 7/8″ cross pin for 1987 and newer trucks and SUVs. Note that it has 2 new circlips for the IRS differentials as well.
View Details
This is a genuine AAM axle gear/internal kit for the Dodge 9.25 front end found in 2007 and newer 3/4 and 1 ton trucks. Please note the smaller pinion gears are rounded where they contact the carrier and use thin thrust washers. From 2003-2006 Dodge used the same internal kit as the GM trucks which [...]
View Details
Cases & Spiders
This is a genuine AAM loaded open differential that fits GM 1/2 trucks and SUV’s 1999 and newer with rear disc brakes and 2005 and up with rear drum brakes.
View Details
This is a genuine AAM spider gear kit that fits GM trucks with the 9.25 front or 9.5 rear 14 bolt 33 spline open differentials. These are for all years in GM applications and from 2003-2006 in Dodge 3/4 and 1 ton front differentials. Note that the small pinion gears are flat and use 1/4″ [...]
View Details