This is an aftermarket rear hub nut for use on Dana 70 and 80 rear axles with 2″ 16 threads per inch. This is the style that uses a wedge key that drives in a keyway on the top of the spindle and cuts through the nylon part of this nut. This nut is right hand thread. Also this nut requires a 2 9/16″ special hub socket to remove and install it. This part number has been discontinued from Dana.
Dana 70 80 Rear Hub Nut Nylon Lock 2″ 16 TPI 2 9/16″ Socket Full Float Dodge, Ford, GM
$24.00
- SKU: 47163
- Brand: Dana/Spicer
- Weight: 1.0
- Shipping: Calculated at checkout
Weight | 1.0 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Dana 70 80 Rear Hub Nut Nylon Lock 2″ 16 TPI 2 9/16″ Socket Full Float Dodge, Ford, GM” Cancel reply
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Dodge Ram | 2500 | 1980 - 1981 |
Dodge Ram | 2500 | 1982 - 1983 |
Dodge Ram | 2500 | 1984 - 1985 |
Dodge Ram | 2500 | 1986 - 1987 |
Dodge Ram | 2500 | 1988 - 1989 |
Dodge Ram | 2500 | 1990 - 1991 |
Dodge Ram | 2500 | 1992 - 1993 |
Dodge Ram | 2500 | 1994 - 1995 |
Dodge Ram | 2500 | 1996 - 1997 |
Dodge Ram | 2500 | 1998 - 1999 |
Dodge Ram | 2500 | 2000 - 2001 |
Dodge Ram | 2500 | 2002 |
Dodge Ram | 3500 | 1980 - 1981 |
Dodge Ram | 3500 | 1982 - 1983 |
Dodge Ram | 3500 | 1984 - 1985 |
Dodge Ram | 3500 | 1986 - 1987 |
Dodge Ram | 3500 | 1988 - 1989 |
Dodge Ram | 3500 | 1990 - 1991 |
Dodge Ram | 3500 | 1992 - 1993 |
Dodge Ram | 3500 | 1994 - 1995 |
Dodge Ram | 3500 | 1996 - 1997 |
Dodge Ram | 3500 | 1998 - 1999 |
Dodge Ram | 3500 | 2000 - 2001 |
Dodge Ram | 3500 | 2002 |
Ford | F350 | 1992 - 1993 |
Ford | F350 | 1994 - 1995 |
Ford | F350 | 1996 - 1997 |
Ford | F350 | 1998 - 1999 |
Ford | F350 | 2000 - 2001 |
Ford | F350 | 2002 - 2003 |
Ford | F350 | 2004 - 2005 |
Ford | F350 | 2006 - 2007 |
Ford | F350 | 2008 - 2009 |
Ford | F350 | 2010 |
Related products
This is a genuine AAM rear hub nut for the later model GM or Dodge trucks with either the 10.5 or 11.5 rear differential. This is the 9 pin nut as opposed to the earlier 6 pin design. This nut uses a retainer (40096297) that snaps onto the nut to hold the key (40082234) in [...]
View DetailsMiscellaneous
This is a genuine AAM rear hub nut for the GM & Dodge 14 bolt full floating rear axles. This includes the 10.5 and 11.5″ ring gears. This is a 6 pin nut that uses the internal key to keep it in place. We also have the keys and retainers for this setup.
View DetailsThis is a genuine AAM differential cover gasket that fits both GM and Dodge trucks with the 11.5 rear differential. We have the weight listed as 2 lbs. because it will ship in a fairly large box.
View DetailsMiscellaneous
GM Chevy 9.25IFS 9.5 Ring Gear Bolts Dodge Ram 2500 3500 2003+ 9.25 Straight 4X4 Front Axle
This is a genuine AAM ring gear bolt that fits GM 9.25IFS and 9.5 rear axles, also 2003+ Dodge Ram 2500 and 3500 AAM 9.25 4X4 straight front axles. 12 required per vehicle. These are left hand thread.
View DetailsThis is a genuine AAM ring gear bolt for the GM 14 bolt 10.5 rear differential. This is the shorter bolt for 4:10, 3:73, 3:42, and 3:21 ratios. The AAM part number is 40019486. Price is each. If you purchase more than 1, (12 required) we will refund for combined shipping after your purchase.
View DetailsMiscellaneous
This is a genuine AAM pinion flange yoke for the 10.5 and 11.5 14 bolt rear differential found in 2003+ Dodge 3/4 and 1 ton trucks. This is used with the 26064030 pinion seal. It already has the wear sleeve on the seal surface. This replaces the perfectly square ones found on some early models [...]
View DetailsMiscellaneous
Gm 14 Bolt 10.5/11.5 Rear End Pinion Yoke Differential Full Float 1410 1415 Series U-Joint
This is a genuine AAM pinion yoke for a 14 bolt with the 10.5″ or 11.5″ ring gear in a GM truck. This is the late style yoke with the sleeve on the seal surface. Can be used on all year trucks from 1973-current as long as you use the late pinion seal (26064030). This [...]
View DetailsThis is a genuine AAM front differential lock t-tab. This is the tab that locks the side adjusters in place. There are 2 required per differential. This style was used from 1988-2006. The GM part number was 3727182. We also have the round style for 2007+.
View Details
Reviews
There are no reviews yet.