This is a genuine Dana tone ring for a Dana 80 rear differential. This works on both Ford and Dodge applications.
Dana 80 Tone Ring Wheel ABS Differential Dodge Ford
$44.66
- SKU: 42414
- Brand: Dana/Spicer
- Weight: 2.0
- Shipping: Calculated at checkout
Weight | 2.0 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Dana 80 Tone Ring Wheel ABS Differential Dodge Ford” Cancel reply
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Dodge Ram | 2500 | 1994 - 1995 |
Dodge Ram | 2500 | 1996 - 1997 |
Dodge Ram | 2500 | 1998 - 1999 |
Dodge Ram | 2500 | 2000 - 2001 |
Dodge Ram | 2500 | 2002 |
Dodge Ram | 3500 | 1994 - 1995 |
Dodge Ram | 3500 | 1996 - 1997 |
Dodge Ram | 3500 | 1998 - 1999 |
Dodge Ram | 3500 | 2000 - 2001 |
Dodge Ram | 3500 | 2002 |
Ford | F350 | 1994 - 1995 |
Ford | F350 | 1996 - 1997 |
Ford | F350 | 1998 - 1999 |
Ford | F350 | 2000 - 2001 |
Ford | F350 | 2002 - 2003 |
Ford | F350 | 2004 - 2005 |
Ford | F350 | 2006 - 2007 |
Ford | F350 | 2008 - 2009 |
Ford | F350 | 2010 |
Ford | F450 | 1994 - 1995 |
Ford | F450 | 1996 - 1997 |
Ford | F450 | 1998 - 1999 |
Ford | F450 | 2000 - 2001 |
Ford | F450 | 2002 - 2003 |
Ford | F450 | 2004 - 2005 |
Ford | F450 | 2006 - 2007 |
Ford | F450 | 2008 - 2009 |
Ford | F450 | 2010 |
Related products
Miscellaneous
Gm 14 Bolt 10.5/11.5 Rear End Pinion Yoke Differential Full Float 1410 1415 Series U-Joint
This is a genuine AAM pinion yoke for a 14 bolt with the 10.5″ or 11.5″ ring gear in a GM truck. This is the late style yoke with the sleeve on the seal surface. Can be used on all year trucks from 1973-current as long as you use the late pinion seal (26064030). This [...]
View DetailsThis is a genuine AAM front axle disconnect kit for 2001 and newer 3/4 and 1 ton GM 4X4 trucks with the 9.25IFS front differential. This kit includes the actuator and most wear items associated with the front differential.
View DetailsThis is a genuine AAM rear hub nut retainer for the later model GM or Dodge trucks with either the 10.5 or 11.5 rear differential. This is for the 9 pin nut as opposed to the earlier 6 pin design. This retainer snaps onto the nut (40091019) to hold the key (40082234) in place under [...]
View DetailsMiscellaneous
Dana 70 80 Rear Hub Nut Nylon Lock 2″ 16 TPI 2 9/16″ Socket Full Float Dodge, Ford, GM
This is an aftermarket rear hub nut for use on Dana 70 and 80 rear axles with 2″ 16 threads per inch. This is the style that uses a wedge key that drives in a keyway on the top of the spindle and cuts through the nylon part of this nut. This nut is right [...]
View DetailsThis is a genuine AAM tone ring for the Dodge 11.5 rear differential found in 3/4 and 1 ton trucks from 2003 to present. This fits on the differential carrier right next to the ring gear.
View DetailsMiscellaneous
This is a genuine AAM pinion flange yoke for the 10.5 and 11.5 14 bolt rear differential found in 2003+ Dodge 3/4 and 1 ton trucks. This is used with the 26064030 pinion seal. It already has the wear sleeve on the seal surface. This replaces the perfectly square ones found on some early models [...]
View DetailsMiscellaneous
This is a genuine AAM rear hub nut for the GM & Dodge 14 bolt full floating rear axles. This includes the 10.5 and 11.5″ ring gears. This is a 6 pin nut that uses the internal key to keep it in place. We also have the keys and retainers for this setup.
View DetailsThis is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. We use a 1 7/16″ 12 point socket on these, but it may actually be a 36mm.
View Details
Reviews
There are no reviews yet.