These Ford axle tube seals show to fit 1998.5 and up F250 & F350 with either the Dana 50 or Dana 60 straight front axle. These are the style seal that spin inside themselves. The new part number for these seals is 2019816.
Ford Dana 50 & 60 Front Axle Tube Seals 1998.5 Up 4X4 Straight F250 F350 Super Duty
$17.51
- SKU: 52148
- Brand: Dana/Spicer
- Weight: .50
- Shipping: Calculated at checkout
Weight | .50 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Ford Dana 50 & 60 Front Axle Tube Seals 1998.5 Up 4X4 Straight F250 F350 Super Duty”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Ford | F250 | 1998 - 1999 |
Ford | F250 | 2000 - 2001 |
Ford | F250 | 2002 - 2003 |
Ford | F250 | 2004 - 2005 |
Ford | F250 | 2006 - 2007 |
Ford | F250 | 2008 - 2009 |
Ford | F250 | 2010 - 2011 |
Ford | F250 | 2012 - 2013 |
Ford | F250 | 2014 |
Ford | F350 | 1998 - 1999 |
Ford | F350 | 2000 - 2001 |
Ford | F350 | 2002 - 2003 |
Ford | F350 | 2004 - 2005 |
Ford | F350 | 2006 - 2007 |
Ford | F350 | 2008 - 2009 |
Ford | F350 | 2010 - 2011 |
Ford | F350 | 2012 - 2013 |
Ford | F350 | 2014 |
Related products
Small Parts & Seals
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and SUV’s with either the 7.6 or 8.0 rear end. This is for the yoke with the factory wear sleeve on it.
View DetailsSmall Parts & Seals
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and 2003 and newer Dodge trucks with either the 10.5 or 11.5 rear end. This is for the yoke with the factory wear sleeve on it
View DetailsSmall Parts & Seals
This is a genuine AAM crush sleeve for the 11.5 rear differential found in GM and Dodge 3/4 & 1 ton trucks.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View DetailsSmall Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View DetailsThis is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View DetailsSmall Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
GM 7.5/7.6 Rear Axle C-Clip S10 Camaro Chevrolet 10 Bolt 7 1/2″
This is a genuine AAM c-clip for the GM 7.5/7.6 rear axle found in S10’s, Malibu’s, Camaro’s etc. These are copper colored steel. These are for both open and limited slip style carriers. 2 required per vehicle.
View Details
Reviews
There are no reviews yet.