417-862-4455
Dana 80 3:31 Ring & Pinion Gear Set Freightliner Dodge 331 Ford Chevy
$1,250.00
- SKU: 74375X
- Brand: Dana/Spicer
- Weight: 34
- Shipping: Calculated at checkout
1 in stock
This is a genuine Dana/Spicer ring and pinion for a Dana 80 in a 3:31 ratio. The tooth counts are 43 on the ring gear and 13 on the pinion. Pinion is a number 44272 and the ring gear is a 44273. This must be used on a 3:73 or faster (3:54) carrier. Be careful on later model Ford’s with 3:73’s, as they were actually a thin gear set on a 4:10 carrier.
| Weight | 34 lbs |
|---|---|
| Dimensions | 15 × 15 × 14 in |
General Inquiries
There are no inquiries yet.
Related products
Ring & Pinion Sets
GM10-373 OEM AAM Ring & Pinion 10 Bolt Gear Set 8.5/8.6 Chevy Car and Truck
This is a genuine AAM ring and pinion set in a 3:73 ratio that fits all GM 8.5 or 8.6 10 bolt differentials from 1973 and up. This includes early Camaros, 1/2 ton pickups and SUVs, Caprice, etc. In our opinion these are the best gearsets available on the market today. They tooth counts are [...]
View Details
Ring & Pinion Sets
This is a genuine Dana ring and pinion set for the front of a Ford truck with Dana 60 3:54 reverse cut. This kit includes all necessary shims, ring gear bolts, pinion nut and washer, and both inner and outer pinion bearings and races.
View Details
Ring & Pinion Sets
GM10-308 OEM AAM Ring & Pinion 10 Bolt Gear Set 8.5/8.6 Chevy Car and Truck
This is a genuine AAM ring and pinion set in a 3:08 ratio that fits all GM 8.5 or 8.6 10 bolt differentials from 1973 and up. This includes early Camaros, 1/2 ton pickups and SUVs, Caprice, etc. In our opinion these are the best gearsets available on the market today. They tooth counts are [...]
View Details
Ring & Pinion Sets
This is a genuine Dana 60 6:17 ring and pinion set for the front or rear in a GM or Dodge application, or the rear of a Ford truck. This is a bare gearset only with no bearings, bolts, or shims. This is the same gear set that is found in the 706033-7X kit.
View Details
Ring & Pinion Sets
GM7.5-342 OEM AAM Ring & Pinion 10 Bolt Gear Set 7.5/7.6 Chevy S10 Camaro
This is a genuine AAM ring and pinion set in a 3:42 ratio that fits all GM 7.5 or 7.6 10 bolt differentials from 1977 and up. This includes S10’s, Malibu’s, Camaro’s , etc. In our opinion these are the best gearsets available on the market today. They tooth counts are 12 on the pinion [...]
View Details
Ring & Pinion Sets
GM 9.25IFS 3:73 Ring and Pinion Front 1988+ Chevrolet 3/4 & 1 Ton
This is a genuine AAM gearset for the 9.25IFS differential found in the front of 1988 and newer GM 3/4 and 1 ton trucks. Tooth count are 11 on the pinion and 41 on the ring gear. This gearset is “Made in U.S.A.”
View Details
This is a genuine AAM ring and pinion set in a 4:10 ratio that fits all GM 8.5 or 8.6 10 bolt differentials from 1973 and up. This includes early Camaros, 1/2 ton pickups and SUVs, Caprice, etc. In our opinion these are the best gearsets available on the market today. They tooth counts are [...]
View Details
Ring & Pinion Sets
Genuine AAM Ford 8.8 3:73 Gear Set Ring & Pinion Mustang F150 Crown Victoria Explorer
This is a genuine AAM gearset in a 3:73 ratio for Ford 8.8 rear differentials. These are made by American Axle & Manufacturing, which is an OEM supplier to Ford. Location of manufacture does vary, but all are made in an AAM facility. We believe these are some of the highest quality gears available.
View Details