417-862-4455
Dana S135 S150 Differential Case Kit Bare Open 3:91-4:44 S135S S150S Dropout Style 3rd Member
$650.00
- SKU: 360KQ102-X
- Brand: Dana/Spicer
- Weight: 47
- Shipping: Calculated at checkout
Out of stock
This is a genuine Dana/Spicer differential case kit that fits a Dana S135 or S150 drop out style 3rd member. This is for use with ratios between 3:91 and 4:44. This kit includes both case halves and the bolts that bolt them together.
| Weight | 47 lbs |
|---|---|
| Dimensions | 14 × 14 × 14 in |
General Inquiries
There are no inquiries yet.
Related products
This is a genuine AAM open differental assembly for the 10.5 rear differential found in some 2003+ Dodge Ram trucks.
View Details
This is a genuine AAM spider gear kit that fits GM trucks with the 8.5 10 bolt 30 spline open differentials from 1989-1999 and drum brakes. This will not work in a posi trac or limited slip carrier.
View Details
This is a genuine AAM spider gear kit that fits GM trucks with the 8.6 10 bolt 30 spline open differentials. These are for the trucks with disc brakes only from mid2000-2006. This will only work in an open carrier with the 1 large window and 1 small window where you access the spider gears. [...]
View Details
This is a genuine AAM axle gear/internal kit for the Dodge 9.25 front end found in 2007 and newer 3/4 and 1 ton trucks. Please note the smaller pinion gears are rounded where they contact the carrier and use thin thrust washers. From 2003-2006 Dodge used the same internal kit as the GM trucks which [...]
View Details
This is a genuine AAM spider gear kit that fits GM trucks with the 9.25 front or 9.5 rear 14 bolt 33 spline open differentials. These are for all years in GM applications and from 2003-2006 in Dodge 3/4 and 1 ton front differentials. Note that the small pinion gears are flat and use 1/4″ [...]
View Details
Dana 60/70 Power-Loc Clutches Dana 60 and Dana 70; Includes Clutches And Steels; Includes Clutches For Both Side Gears Dana Spicer Dana 60/70 Power-Loc Clutches Locking Differential Clutch Pack. The new Dana part number is 2021288, but we still stock it under the original part number 707075X.
View Details
This is a genuine Dana 35 clutch pack for a Track Lok differential in a Jeep. This kit includes enough clutches to do both sides. This kit will also fit the Dodge 8.25 rear differential with a Track Lok differential.
View Details
Cases & Spiders
This is a genuine AAM loaded open differential carrier assembly that fit the GM 7.6 or 7 5/8″ rear differential with 28 spline axles and 3:23 or numerically higher (3:42, 3:73, etc.). These were used in early 1990’s and newer S10’s and Camaro’s.
View Details