417-862-4455No products in the cart.
Dana 35 Clutch Pack Track Lok Limited Slip Posi Differential Jeep Dodge 8.25 C8.25
$58.91
- SKU: 707165X
- Brand: Dana/Spicer
- Weight: 3.0
- Shipping: Calculated at checkout
This is a genuine Dana 35 clutch pack for a Track Lok differential in a Jeep. This kit includes enough clutches to do both sides. This kit will also fit the Dodge 8.25 rear differential with a Track Lok differential.
| Weight | 3.0 lbs |
|---|---|
| Dimensions | 6 × 4 × 2 in |
Be the first to review “Dana 35 Clutch Pack Track Lok Limited Slip Posi Differential Jeep Dodge 8.25 C8.25”
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| Dodge Ram | 1500 | 1976 - 1977 |
| Dodge Ram | 1500 | 1978 - 1979 |
| Dodge Ram | 1500 | 1980 - 1981 |
| Dodge Ram | 1500 | 1982 - 1983 |
| Dodge Ram | 1500 | 1984 - 1985 |
| Dodge Ram | 1500 | 1986 - 1987 |
| Dodge Ram | 1500 | 1988 - 1989 |
| Dodge Ram | 1500 | 1990 - 1991 |
| Dodge Ram | 1500 | 1992 - 1993 |
| Dodge Ram | 1500 | 1994 - 1995 |
| Dodge Ram | 1500 | 1996 - 1997 |
| Dodge Ram | 1500 | 1998 - 1999 |
| Dodge Ram | 1500 | 2000 |
| Jeep | Wrangler | 1987 - 1988 |
| Jeep | Wrangler | 1989 - 1990 |
| Jeep | Wrangler | 1991 - 1992 |
| Jeep | Wrangler | 1993 - 1994 |
| Jeep | Wrangler | 1995 - 1996 |
| Jeep | Wrangler | 1997 - 1998 |
| Jeep | Wrangler | 1999 - 2000 |
| Jeep | Wrangler | 2001 - 2002 |
| Jeep | Wrangler | 2003 - 2004 |
| Jeep | Wrangler | 2005 |
Related products
Small Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
$15.01
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View Details
Small Parts & Seals
GM 10 12 Bolt 8.5/8.6 Ford 8.8 Rear Axle C-Clip 8.875 Chevrolet Car Truck
$2.25
This is a genuine AAM c-clip for the GM 8.5/8.6 10 bolt and 8.875 12 bolt also Ford 8.8 rear axles. These are copper colored steel c-clips. 2 required per vehicle.
View Details
Small Parts & Seals
$3.79
This is a genuine AAM crush sleeve for the 11.5 rear differential found in GM and Dodge 3/4 & 1 ton trucks.
View Details
Small Parts & Seals
$9.75
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket.
View Details
Small Parts & Seals
Dodge Dana 44 & 60 Front Outer Stub Axle Castle Nut Also AAM 9.25 Spindle 4X4
$5.00
This genuine Dana axle nut fits all Dodge front axles including Dana 44 & 60 and the AAM 9.25 found in 2003+ trucks. This is a castle nut. We also have the washer available. This is the same part as AAM 40010627.
View Details
$2.99
This is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View Details
Small Parts & Seals
GM 8.6 Pinion Yoke Sleeve Seal 1999+ Chevrolet 10 Bolt 1/2 Ton 3/4 GM9.5 14 Bolt Trucks & SUVs
$6.31
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 1/2 ton trucks also some 1998 model Suburban and Tahoe. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used the earlier National [...]
View Details
$3.94
This is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. We use a 1 7/16″ 12 point socket on these, but it may actually be a 36mm.
View Details
Reviews
There are no reviews yet.