This is a genuine Dana 60 front outer stub axle that fits 3/4 and 1 ton Dodge trucks from 1994-1999. It is 7.05″ long. This axle has the dust shield and ABS tone ring already installed.
Dodge RAM 2500 3500 Dana 60 Front 4X4 Outer Stub Axle 1994 1995 1996 1997 1998 1999 With ABS
$150.00
- SKU: 75690X
- Brand: Dana/Spicer
- Weight: 7.0
- Shipping: Calculated at checkout
Out of stock
| Weight | 7.0 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
General Inquiries
There are no inquiries yet.
Related products
Axles & Axle Bearings
AAM 1999+ GM 9.5 9 1/2″ 14 Bolt Rear Axle Shaft 2 Wheel Drive 2wd or 4wd 33 Spline 8 Lug Disc Brakes
This is a genuine AAM rear axle shaft that fits some 2 or 4 wheel drive GM 3/4 ton trucks with the 9.5 rear differential 1999-2004 with rear disc brakes. This axle is 33 1/2″ long and 8 lug and 33 splines. Please check length or part number before ordering as there are several different [...]
View DetailsAxles & Axle Bearings
AAM Rear Axle Shaft 1988-1991 4X4 4wd GM Chevy Blazer Suburban 8.5 8 1/2 10 Bolt 6 Lug
This is a genuine AAM rear axle shaft that fits GM 4X4 Suburban and Blazer 1988-1991 that still used the straight front axle. This axle is 31 1/2″ long 30 spline and 6 lug. This is actually a GM part number. The last 4 digits are usually cast on the axle flange of the original [...]
View DetailsAxles & Axle Bearings
AAM Dodge 9.25 Left LH Front 4X4 Axle Assembly 2003-2008 C9.25 Ram 2500 3500
This is a genuine AAM left hand axle assembly for the front of a 3/4 or 1 ton Dodge truck 2003-2008. These are for the 1485 series u-joint. The tag has the Dodge part number 5086667AB for reference.
View DetailsAxles & Axle Bearings
AAM 9.25 Dodge Ram RH Right Front Inner Axle Shaft 4X4 2003-2009
This is a genuine AAM right hand inner axle shaft for the front of a Dodge Ram 3/4 or 1 ton truck from 2003-2009. This axle is 38″ long from the center of the u-joint to the tip of the splines. This is set up for the 1485 series u-joint.
View DetailsAxles & Axle Bearings
AAM Dodge 9.25 Right RH Front Axle Assembly 2003-2008 C9.25 Ram 2500 3500
This is a genuine AAM right hand axle assembly for the front of a 3/4 or 1 ton Dodge truck 2003-2008. These are for the 1485 series u-joint. The tag has the Dodge part number 5086666AB for reference.
View DetailsAxles & Axle Bearings
This genuine Dana front outer stub axle fits Dodge 1/2 ton trucks from 1994-2001 with the Dana 44 front axle. this axle is 6.77 long from the center of the u-joint to the tip of the splines and is 1.41 33 spline. If you are not sure of this part number you can call or [...]
View DetailsAxles & Axle Bearings
1992-2005 Chevy GMC S10 S15 Axle Bearing & Seal Kit 7.5/7.6 GM7.5 GM7.6
This ia a genuine AAM axle bearing kit for the 7.5 and 7.6 rear axles found in 1992-2005 Chevy S10’s and Blazers also GMC S15’s. This kit includes all parts necessary to replace the axle bearings and seals on both sides. The common part numbers for the bearings is 5707 and the seals are 8660S. [...]
View DetailsAxles & Axle Bearings
AAM Rear Axle Bearing & Seal kit 1/2 ton Chevy GMC Truck Tahoe Suburban 1990+
This is a genuine AAM axle bearing and seal kit for 1 side that fits 1990 and newer Chevy trucks and SUVs. This kit also includes a new c-clip for the axle. This is the same as bearing number 513067 and seal 4762N at your local parts store. 2 kits are required per vehicle.
View Details
417-862-4455





