417-862-4455
Ford Explorer 4405 Transfer Case Range Shift Cam Spool 1995-1999
$12.00
- SKU: 4405099009
- Brand: Borg Warner
- Weight: .30
- Shipping: Calculated at checkout
This is a genuine Borg Warner shift cam for the 4405 transfer case found in some 1995-1999 Ford Explorer’s. We recommend replacing these if they show even the slightest wear where the fork roller sits. This can cause the transfer case to go into neutral on deceleration or loose reverse.
| Weight | .30 lbs |
|---|---|
| Dimensions | 6 × 6 × 2 in |
General Inquiries
There are no inquiries yet.
Related products
Transfer Case Parts
This is the hub that splines into the sprocket and synchronizer clutch and rides on the mainshaft of the transfer case on a 261 or 263 GM. This one is made to use the seperate synchronizer clutch. Be sure that yours is made like this as some were a 1 piece design with the synchronizer [...]
View Details
Transfer Case Parts
1999-2007 Chevy 261 & 263 GM Transfer Case Middle Synchronizer Ring Fiber Lined Syncro Mode
This is the middle synchronizer ring for a 261 or 263 GM transfer case. It is 1 of 3 parts that make up the synchronizer pack.
View Details
Transfer Case Parts
This range fork fits all versions of the 263 GM transfer case including 263XHD. This is the updated fork for use with the 43681 range slider with the wider groove for the shift fork. If your transfer case is 2002 or older you may have to update the slider as well. This fork does not [...]
View Details
Transfer Case Parts
This transfer case sprocket is used in both Ford and Dodge 271 and 273 units. Both sprockets are the same in these units.
View Details
Transfer Case Parts
GM 261 & 263 XHD Transfer Case Mainshaft Chevy Duramax or 8100 261XHD 263XHD 1999-2007
This mainshaft fits the GM 261 and 263 SHD or XHD transfer case found behind the Allison automatic transmissions or ZF 6 speed manual transmissions.
View Details
Transfer Case Parts
This range hub fits all 241DHD transfer cases with the PTO opening on the side of the transmission. This is used with 17520 snap ring and 17522 range collar.
View Details
Transfer Case Parts
29 Spline Input Shaft 241DHD/241DLD Transfer Case Dodge 241 Wide Bearing
This 29 spline input shaft fits all 241 Dodge transfer cases including 241DLD and 241DHD with the fine tooth planetaries (1995 and newer). It is set up for the wide (BD50-8 or N5210KLB) bearing. We also have a 29 spline input for 241DHD only with the narrow input bearing (110L or 6010N) if you prefer. [...]
View Details
Transfer Case Parts
This is the inner most ring for a 261 or 263 GM transfer case. It is part of a 3 piece synchronizer pack.
View Details