417-862-4455
Ford F150 F100 1973-1979 Dana 44 Bronco 1978-1979 4X4 Front Outer Stub Axle
$120.00
- SKU: 620200
- Brand: Dana/Spicer
- Weight: 5.0
- Shipping: Calculated at checkout
2 in stock
This is a genuine Dana/Spicer front outer stub axle that fits Ford F100 F150 and F250 from 1973-1979 and Bronco 1978-1979 with the Dana 44 4X4 front axle. Here are some specifications from Dana’s website:
| Brand |
Spicer |
| Axle Model |
DANA 44 |
| Material |
Steel |
| ABS/Non-ABS |
Non-ABS |
| Axle Cover Bolt Hole Qty |
10 |
| Location |
Front Outer |
| Axle Type |
Outer |
| Length (IN) |
9.72 |
| Spline Count |
19 |
| Outer Stub Length (In) |
9.72 |
| Outer Stub Spline Count |
19 |
| Includes Universal Joint |
N |
| Universal Joint Series |
1310 |
| Weight | 5.0 lbs |
|---|---|
| Dimensions | 12 × 4 × 4 in |
Be the first to review “Ford F150 F100 1973-1979 Dana 44 Bronco 1978-1979 4X4 Front Outer Stub Axle”
You must be logged in to post a review.
| Make | Model | Year |
|---|---|---|
| Ford | Bronco | 1973 - 1974 |
| Ford | Bronco | 1975 - 1976 |
| Ford | Bronco | 1977 - 1978 |
| Ford | Bronco | 1979 |
| Ford | F150 | 1973 - 1974 |
| Ford | F150 | 1975 - 1976 |
| Ford | F150 | 1977 - 1978 |
| Ford | F150 | 1979 |
General Inquiries
There are no inquiries yet.
Related products
Axles & Axle Bearings
AAM Dodge Ram 9.25 Front Axle Assembly RH Right 2010-2013 3/4 & 1 Ton 2500 3500 4X4
This is a genuine AAM right front axle assembly for the 2010-2013 Dodge Ram 2500 and 2500 series trucks with the 9.25 4X4 front axle. These use the 1555 series u-joints and come fully assembled as pictured. The Dodge part number is 68065426AB. This axle has been discontinued, but the individual components are still available [...]
View Details
Axles & Axle Bearings
AAM 1988-1991 GM 8.5 8 1/2″ 10 Bolt Rear Axle Shaft 2 Wheel Drive 5 Lug 2wd 30 Spline
This is a genuine AAM rear axle shaft that fits 2 wheel drive GM 1/2 ton trucks Suburban and Tahoe with the 8.5 rear differential 1988-1991. This axle is 31 3/8″ long and 6 lug and 30 splines. This is actually a GM part number and the last 4 digits are cast on the center [...]
View Details
Axles & Axle Bearings
These are genuine Dana outer stub axles that show to fit 2000-2002 Dodge 3/4 and 1 ton trucks with the Dana 60 front differentials. These are 1.41 33 spline and 7.39 from the center of the u-joint to the tip of the threads. If you aren’t sure about the part number for you application you [...]
View Details
Axles & Axle Bearings
AAM Rear Axle Bearing & Seal kit 1/2 ton Chevy GMC Truck Tahoe Suburban 1990+
This is a genuine AAM axle bearing and seal kit for 1 side that fits 1990 and newer Chevy trucks and SUVs. This kit also includes a new c-clip for the axle. This is the same as bearing number 513067 and seal 4762N at your local parts store. 2 kits are required per vehicle.
View Details
Axles & Axle Bearings
Chevrolet Astro GMC Safari Van Minivan Rear Axle Bearing Kit 7.5/7.6 1990-2002 AAM
This is a genuine AAM axle bearing kit for the rear of the Chevrolet Astro or GMC Safari minivans with the 7.5 or 7.6 rear differential from 1990-2002. The industry numbers are 513023 (bearings) and 4795V (seals). This kit includes bearings and seals for both sides as well as axle c-clips, and is much cheaper [...]
View Details
Axles & Axle Bearings
This is a genuine AAM wheel end kit that includes everything necessary to replace rear hub nearings and seals on 2011+ GM 1 ton trucks with the 11.5 diameter ring gear and dual rear wheels. These kits are great because of all the small parts that are included.
View Details
Axles & Axle Bearings
AAM 9.25 Dodge Ram LH Left Front Inner Axle Shaft 4X4 2003-2009
This is a genuine AAM left hand inner axle shaft for the front of a Dodge Ram 3/4 or 1 ton truck from 2003-2009. This axle is 19 5/8″ long from the center of the u-joint to the tip of the splines. This is set up for the 1485 series u-joint.
View Details
Axles & Axle Bearings
Dana 44 60 Dodge Disconnect Slide Collar Front Differential Axle 4X4 Ram 1500 2500 3500 Jeep
This genuine Dana slide collar fits most Dodge Dana 44 and 60 front disconnect axles up to 1999. 2000+ Dodge Dana 60’s used a larger splined slide collar which is not available from Dana. This also fit’s many Jeep applications with the disconnect front axle.
View Details
Reviews
There are no reviews yet.