This is a SVL spider gear kit that fits Ford products with the 7.5 rear differential. This includes Aerostar minivans, Ranger pickups, and Mustangs. This kit includes a notched cross pin, so it can be used with gear ratio’s as low as 4:56.
Ford Ranger Mustang Aerostar 7.5 Rear Differential Spider Axle Gear Kit 28 Spline w/Notched Cross Pin
$75.00
- SKU: 2023884
- Brand: SVL
- Weight: 3.5
- Shipping: Calculated at checkout
1 in stock
Weight | 3.5 lbs |
---|---|
Dimensions | 10 × 6 × 2 in |
Related products
Cases & Spiders
This is a genuine AAM bare open differential carrier assembly that fit the GM 7.6 or 7 5/8″ rear differential with 28 spline axles and 3:23 or numerically higher (3:42, 3:73, etc.). These were used in early 1990’s and newer S10’s and Camaro’s.
View DetailsDana 70/80 Trac-Loc Clutches Dana 70 and Dana 80; Includes Clutches And Steels; Includes Clutches For Both Side Gears Dana Spicer Dana 70/80 Trac-Loc Clutches 702009 Locking Differential Clutch Pack. The new Dana part number is 2003819, but we still stock it under the original part number 702009.
View DetailsCases & Spiders
This is a genuine Dana clutch pack for a Dana 60 Trac Lok differential. This kit includes enough clutches to do both sides.
View DetailsThis is a genuine AAM spider gear kit that fits GM SUVs trucks with the 8.0 28 spline open differentials. Applications include Colorado, Canyon, and Trailblazers. This will not work in a posi trac or limited slip carrier.
View DetailsThis is a genuine AAM spider gear kit for the factory Ford 8.8 31 spline posi trac differential. Include everything, except the clutches. This kit has the 7/8″ cross pin for 1987 and newer trucks and SUVs. Note that it has 2 new circlips for the IRS differentials as well.
View DetailsThis is a genuine AAM axle gear/internal kit for the Dodge 9.25 front end found in 2007 and newer 3/4 and 1 ton trucks. Please note the smaller pinion gears are rounded where they contact the carrier and use thin thrust washers. From 2003-2006 Dodge used the same internal kit as the GM trucks which [...]
View DetailsCases & Spiders
This is a genuine AAM loaded open differential carrier assembly that fit the GM 7.6 or 7 5/8″ rear differential with 28 spline axles and 3:23 or numerically higher (3:42, 3:73, etc.). These were used in early 1990’s and newer S10’s and Camaro’s.
View DetailsDana 60/70 Power-Loc Clutches Dana 60 and Dana 70; Includes Clutches And Steels; Includes Clutches For Both Side Gears Dana Spicer Dana 60/70 Power-Loc Clutches Locking Differential Clutch Pack. The new Dana part number is 2021288, but we still stock it under the original part number 707075X.
View Details