This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end of the axle tube.
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
$8.55
- SKU: 50381
- Brand: Dana/Spicer
- Weight: .50
- Shipping: Calculated at checkout
Weight | .50 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60” Cancel reply
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Ford | F250 | 1998 - 1999 |
Ford | F250 | 2000 - 2001 |
Ford | F250 | 2002 - 2003 |
Ford | F250 | 2004 - 2005 |
Ford | F350 | 1998 - 1999 |
Ford | F350 | 2000 - 2001 |
Ford | F350 | 2002 - 2003 |
Ford | F350 | 2004 - 2005 |
Related products
Small Parts & Seals
This is a genuine AAM pinion nut washer found on GM & Dodge 3/4 and 1 ton trucks. This is to be used with nut part number 40003027.
View DetailsSmall Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket.
View DetailsSmall Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View DetailsSmall Parts & Seals
This genuine Dana pinion nut washer that fits all Dana 80 rear ends. This goes with the 37082 nut.
View DetailsThis is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. We use a 1 7/16″ 12 point socket on these, but it may actually be a 36mm.
View DetailsSmall Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 2006+ Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 2006 and newer Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked SKF 2017426 DANA. This seal measures approx. 5.48″ outside diameter. The original part number was 2017426.
View DetailsSmall Parts & Seals
Ford Dana 50 & 60 Front Axle Tube Seals 1998.5 Up 4X4 Straight F250 F350 Super Duty
These Ford axle tube seals show to fit 1998.5 and up F250 & F350 with either the Dana 50 or Dana 60 straight front axle. These are the style seal that spin inside themselves. The new part number for these seals is 2019816.
View Details
Reviews
There are no reviews yet.