417-862-4455
GM Truck Tahoe Suburban 8.25IFS 9.25IFS Pinion Seal 4X4 Front Axle Chevy 1988-2013
$9.89
- SKU: 40007712
- Brand: AAM American Axle Manufacturing
- Weight: .20
- Shipping: Calculated at checkout
This is a genuine AAM pinion seal for the 8.25 or 9.25 IFS 4X4 front axle found in 1988-2013 GM trucks and SUV’s. This will fit 1500, 2500, and 3500 series trucks. This is the same as a National seal 710281.
| Weight | .20 lbs |
|---|---|
| Dimensions | 3 × 3 × 1 in |
General Inquiries
There are no inquiries yet.
Related products
This is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. This nut also fits the 10.5 Dodge rear differential. We use a 1 7/16″ 12 point socket on these, but it may [...]
View Details
Small Parts & Seals
GM 8.6 Pinion Yoke Sleeve Seal 1999+ Chevrolet 10 Bolt 1/2 Ton 3/4 GM9.5 14 Bolt Trucks & SUVs
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 1/2 ton trucks also some 1998 model Suburban and Tahoe. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used the earlier National [...]
View Details
Small Parts & Seals
GM 10 12 Bolt 8.5/8.6 Ford 8.8 Rear Axle C-Clip 8.875 Chevrolet Car Truck
This is a genuine AAM c-clip for the GM 8.5/8.6 10 bolt and 8.875 12 bolt also Ford 8.8 rear axles. These are copper colored steel c-clips. 2 required per vehicle.
View Details
Small Parts & Seals
Ford Straight 4X4 Front Axle Tube Dust Seal 2006+ Dana 50 & 60 F250 F350
This genuine Dana axle tube dust seal fits 2006 and newer Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FES 5M-15197 and 53877. These are approx. 3.450″ outside diameter, which is larger than the earlier ones. This seal goes on the axle itself right behind the u-joint at [...]
View Details
Small Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket. The newest Dana part number for this yoke is 2001855.
View Details
Small Parts & Seals
This genuine Dana pinion nut washer that fits all Dana 80 rear ends. This goes with the 37082 nut.
View Details
Small Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View Details
Small Parts & Seals
GM 9.5 Rear Pinion Yoke Seal 1998+ AAM 3/4 ton Truck Dodge 4X4 Front 2500 3500 9.25 Front 2003+
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and SUV’s with either the 9.5 rear end. This is for the yoke with the factory wear sleeve on it. This also fits Dodge 3/4 and 1 ton 4X4 trucks 2003 and newer with the AAM 9.25 front axle. These [...]
View Details